VW3A3312
LonWorks communication card - 78 kbps
- Product or component type
- Communication card
- Range compatibility
- Altivar 61
Altivar 61Q - Communication port protocol
- LonWorks
- Connector type
- 1 removable 3-way screw connector
- Transmission rate
- 78 kbps
- Topology
- TP/FT-10 (free topology)
- Communication service
- LonMark 0000: Node Object
LonMark 6010: Variable Speed Motor Drive - Display type
- 1 LED for fault
1 LED for service
1 LED for status
Graphic display terminal for control word received
Graphic display terminal for reference received - Product weight
- 0.3 kg
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- ATV61 Lonworks user manual to access the SNVTs for commanding the drive over the network.
Issue: ATV61 Lonworks user manual to access the SNVTs for commanding the drive over the network. Product Line: Altivar 61 with the lonworks card VW3A3312 Environment: All Cause: Needs a copy of the user manual for accessing the SNVT points. Resolution: atv61_LONWORKS_EN_V2 CTA-ID : 2039332 1765273.pdf
Read more - E-Flex Altivar 61 How can I invert the mA analog input signal?
Issue: How can you invert the mA signal so the drive runs at low speed at 20mA and high speed at 4mA? Product line: Altivar ATV61, ATV71 Environment: All models, all serial numbers Cause: Inverting the mA analog input signal Resolution: Menu 1.5 AI2 configuration AI2 min set to 20mA and AI2 max set to 4mA ATV71_programming_manual ref
Read more - Is there another full version of SOMOVE software, besides SOMOVE Lite?
Issue: Is there another full version of SOMOVE software, besides SOMOVE Lite? Product Line: Altivar 71 Altivar 61 Altivar 12 Altivar 32 Altivar 312 LXM 32 Altivar 31 Altistart 22 TeSysU TeSu Environment: All models, All series Cause: Potential confusion of product naming to indicate SOMOVE Lite may not be a full featured version. Resolution: Yes, SoMove 2.0 and higher is a full version. You must install associated DTM files. There is also SoMove Mobile.
Read more - Should you remove the two factory installed jumpers between PA/PO and PWR and +24vdc on the ATV61/71 drives?
Issue: Should you remove the two factory installed jumpers between PA/PO and PWR and +24vdc on the ATV61/71 drives? Product Line: Altivar ATV61 and ATV71 Environment: IP20 ATV61 and ATV71 drives Cause: Drives are shipped with factory jumpers should they be removed or not? Resolution: PO and PA jumpers normally should not be removed. In some cases a customer may remove the PO/PA jumpers and add a DC choke in its place. PWR and +24vdc jumpers normally should not be removed. In some...
Read more - Are line chokes mandatory for ATV61 Drive?
Issue: Are line chokes mandatory for ATV61 Drive? Product Line: ATV 61 Environment: All Models , All serial numbers Resolution: Line chokes are mandatory: For ATV 61HU40M3…HU75M3 drives powered by a 200…240 V 50/60 Hz single phase supply voltage. For ATV 61HC11Y…HC80Y drives. For ATV 61QC13Y…QC80Y drives. Their use is recommended for ATV 61H ... S6X and ATV 61HU30Y…HD90Y drives. Line chokes can be used in...
Read more
