LC3D32AU7
Generally ships in 1 or 2 days
SKU
LC3D32AU7
TeSys D - star delta starter - 3 x 3P (3 NO) - 32 A - 240 V AC coil
Main
- Range
- TeSys
- Product name
- TeSys D
- Product or component type
- Star delta starter
- Device short name
- LC3D
- Contactor application
- Motor control
- Utilisation category
- AC-3
- Device presentation
- Pre-wired
- Poles description
- 3 x 3P
- Pole contact composition
- 3 x 3 NO
- [Ue] rated operational voltage
- <= 690 V AC 25...400 Hz for power circuit
- [Ie] rated operational current
- 32 A (<= 60 °C) AC AC-3 for power circuit at <= 440 V
- Motor power kW
- 15 kW at 220/230 V AC 50/60 Hz
25 kW at 380/400 V AC 50/60 Hz
30 kW at 415 V AC 50/60 Hz
30 kW at 440 V AC 50/60 Hz - Control circuit type
- AC 50/60 Hz
- [Uc] control circuit voltage
- 240 V AC 50/60 Hz
- Auxiliary contact composition
- 1 NC for KM1 star contactor
- [Uimp] rated impulse withstand voltage
- 6 kV conforming to IEC 60947
- Overvoltage category
- III
- [Ui] rated insulation voltage
- 690 V conforming to IEC 60947-4-1 power circuit
600 V certifications CSA power circuit
600 V certifications UL power circuit
690 V conforming to IEC 60947-1 signalling circuit
600 V certifications CSA signalling circuit
600 V certifications UL signalling circuit - Electrical durability
- 1.65 Mcycles 32 A AC-3 <= 440 V
- Provided equipment
- Protective cover
- Interlocking type
- Mechanical
- Mounting support
- Plate
- Standards
- EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508
CSA C22.2 No 14 - Product certifications
- BV
CCC
CSA
DNV
GL
GOST
LROS (Lloyds register of shipping)
RINA
UL
Complementary
- Connections - terminals
- Screw clamp terminals for control circuit 1 1...4 mm² flexible without cable end
Screw clamp terminals for control circuit 2 1...4 mm² flexible without cable end
Screw clamp terminals for control circuit 1 1...4 mm² flexible with cable end
Screw clamp terminals for control circuit 2 1...2.5 mm² flexible with cable end
Screw clamp terminals for control circuit 1 1...4 mm² solid without cable end
Screw clamp terminals for control circuit 2 1...4 mm² solid without cable end
Screw clamp terminals for power circuit 1 2.5...10 mm² flexible without cable end
Screw clamp terminals for power circuit 2 2.5...10 mm² flexible without cable end
Screw clamp terminals for power circuit 1 1...10 mm² flexible with cable end
Screw clamp terminals for power circuit 2 1.5...6 mm² flexible with cable end
Screw clamp terminals for power circuit 1 1.5...10 mm² solid without cable end
Screw clamp terminals for power circuit 2 2.5...10 mm² solid without cable end - Tightening torque
- 1.7 N.m for control circuit screw clamp terminals flat Ø 6 mm
1.7 N.m for control circuit screw clamp terminals Philips No 2
2.5 N.m for power circuit screw clamp terminals flat Ø 6 mm
2.5 N.m for power circuit screw clamp terminals Philips No 2 - Mechanical durability
- 15 Mcycles
- Operating rate
- 30 cyc/h at <= 60 °C
- Starting time
- 30 s
- Coil technology
- Without built-in suppressor module
- Control circuit voltage limits
- 0.3...0.6 Uc at 60 °C drop-out 50/60 Hz
0.8...1.1 Uc at 60 °C operational 50 Hz
0.85...1.1 Uc at 60 °C operational 60 Hz - Inrush power in VA
- 70 VA at 20 °C 0.75 60 Hz
70 VA at 20 °C 0.75 50 Hz - Hold-in power consumption in VA
- 7.5 VA at 20 °C 0.3 60 Hz
7 VA at 20 °C 0.3 50 Hz - Heat dissipation
- 2...3 W at 50/60 Hz
- Auxiliary contacts type
- Mechanically linked conforming to IEC 60947-5-1 3 x 1 NO + 1 NC
Mirror contact conforming to IEC 60947-4-1 3 x 1 NC - Signalling circuit frequency
- 25...400 Hz
- Minimum switching current
- 5 mA for signalling circuit
- Switching voltage
- 17 V for signalling circuit
- Non-overlap time
- 1.5 ms on energisation between NC and NO contact
1.5 ms on de-energisation between NC and NO contact - Width
- 166 mm
- Height
- 124 mm
- Depth
- 149 mm
- Product weight
- 2.03 kg
Environment
- Insulation resistance
- > 10 MOhm for signalling circuit
- IP degree of protection
- IP20 front face conforming to IEC 60529
- Protective treatment
- TH conforming to IEC 60068-2-30
- Pollution degree
- 3
- Ambient air temperature for storage
- -60...80 °C
- Ambient air temperature for operation
- -40...70 °C at Uc
- Operating altitude
- 3000 m without derating in temperature
- Fire resistance
- 850 °C conforming to IEC 60695-2-1
- Flame retardance
- V1 conforming to UL 94
- Mechanical robustness
- Vibrations contactor open 2 Gn, 5...300 Hz
Vibrations contactor closed 4 Gn, 5...300 Hz
Shocks contactor closed 15 Gn for 11 ms
Shocks contactor open 8 Gn for 11 ms
Offer Sustainability
- Sustainable offer status
- Green Premium product
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Reference not containing SVHC above the threshold
- Product environmental profile
- Product Environmental Profile
- Product end of life instructions
- End of Life Information
Contractual warranty
- Warranty period
- 18 months
- What is the replacement for the Tesys D Contactor LC1D65U7?
use the new code - LC1D65AU7
3P EVERLINK CONTACTOR 65A 30kW AC3 240VAC
See link for Data Sheet:
https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=LC1D65AU7 - Is our tesys d contactor a double break pole type contactor
Yes,Tesys D (LC1D*) uses linear translation movement,hence double breaking of pole is obtained,please find attached document in support of it.
- What is the maximum DC voltage per pole for TeSys D range contactors.
The maximum DC voltage for TeSys D range contactor is 75 Volt per pole. This voltage is applicable for the specification of L/R <= 15ms in DC applications.
- What is the contact rating of the Tesys D-line relays?
Issue:
Checking on the Tesys D-line relays contact ratings.
Product Line:
Tesys D Contactors
Environment:
IEC Contactors and Starters
Resolution:
The contacts are rated NEMA A600 10 amps continuous, and NEMA Q600 2.5 amps continuous.
- Will the LA4DC1U diode suppressor mount to current Tesys D DC coils?
Issue:
Will the LA4DC1U diode suppressor mount to current Tesys D DC coils?
Product Line:
IEC contactors and starters
Environment:
Products sold and used in the United States
Resolution:
No. The LA4DC1U diode unit will only fit the older TeSys D contactors. Tesys D DC coils include suppression automatically, it`s not needed.
Write Your Own Review
End of life manual
Product environmental
REACh Declaration
RoHs Declaration
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech
Sign In
Create New Account