FTB1DN12E04SP0
I/O splitter box FTB monobloc - IP67 - for DeviceNet - 12I - 4O
- Range of product
- Advantys FTB
- Product or component type
- IP67 monobloc I/O splitter box
- Enclosure material
- Plastic
- Bus type
- DeviceNet
- Input/output number
- 16
- Discrete input number
- 12
- Discrete output number
- 4
- Structure type
- According to CAN, layer 7
According to EN 50325
According to ISO 11898
- [Ue] rated operational voltage
- 24 V DC
- Supply current
- 8 A
- Internal current consumption
- 120 mA
- Discrete input voltage
- 24 V
- Discrete input voltage type
- DC
- Discrete input current
- <= 200 mA
- Discrete input logic
- Positive
- Product compatibility
- With 2-wire/3-wire sensors
- Discrete output voltage
- 24 V
- Discrete output voltage type
- DC
- Discrete output current
- 1600 mA
- Discrete output type
- Transistor
- Sensor power supply
- 18...30 V
- Reverse polarity protection
- Internal
- Switching frequency
- <= 20 Hz
- Tungsten load
- <= 10 W
- Electrical connection
- 1 female connector 7/8" power OUT
1 female connector M12 bus OUT
1 male connector 7/8" power IN
1 male connector M12 bus IN
8 female connectors M12 sensor or actuator - Output connection cable size
- 0.34 mm², cable length = 5 m
0.75 mm², cable length = 10 m - Method of access
- Master/slave
- Transmission rate
- 500 kbit/s
- Transmission support medium
- 4 twisted shielded wires
- Number of addresses
- 1...63
- Input/output number of splitter box
- 4 I + 4 O + 8 diagnostic inputs
- Output overvoltage protection
- Suppressor diode
- Protection type
- Short-circuit protection
- Input filtering
- 1 ms
- Control threshold undervoltage
- 0...18 V
- Status LED
- 1 LED for actuator power supply diagnostics
1 LED for sensor power supply diagnostics
1 LED per channel for channel diagnostic
1 LED per channel for channel status
2 LEDs for bus diagnostic - Surge withstand
- -1 kV power supply (asymmetrical) conforming to IEC 61000-4-5
1 kV power supply (asymmetrical) conforming to IEC 61000-4-5
-1 kV signal (asymmetrical) conforming to IEC 61000-4-5
1 kV signal (asymmetrical) conforming to IEC 61000-4-5
0.5 kV ground/PE conforming to IEC 61000-4-5
0.5 kV power supply (symmetrical) conforming to IEC 61000-4-5
0.5 kV signal (symmetrical) conforming to IEC 61000-4-5 - Operating position
- Any position
- Fixing mode
- By 2 screws
- Tightening torque
- 1.5 N.m for M4 screw(s)
- Product weight
- 0.45 kg
- Standards
- IEC 1131-2 Type 2
- Product certifications
- cULus
- Ambient air temperature for operation
- 0...55 °C
- Ambient air temperature for storage
- -25...70 °C
- IP degree of protection
- IP67 conforming to IEC 60529
- Operating altitude
- 0...2000 m
- Vibration resistance
- 0.35 mm constant amplitude at 10...57 Hz conforming to IEC 68-2-6, FC test
5 gn constant acceleration at 57...150 Hz conforming to IEC 68-2-6, FC test - Shock resistance
- 30 gn, for 11 ms conforming to IEC 68-2-27, EA tests
- Resistance to electrostatic discharge
- -4 kV in contact conforming to IEC 61000-4-2
4 kV in contact conforming to IEC 61000-4-2
-8 kV in air conforming to IEC 61000-4-2
8 kV in air conforming to IEC 61000-4-2 - Resistance to radiated fields
- 10 V/m conforming to IEC 61000-4-3
- Resistance to fast transients
- -2 kV power supply conforming to IEC 61000-4-4
2 kV power supply conforming to IEC 61000-4-4
-2 kV signal conforming to IEC 61000-4-4
2 kV signal conforming to IEC 61000-4-4 - Resistance to conducted disturbances
- 10 V conforming to IEC 61000-4-6
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- What are the main upgrades of the Advantys configuration software made by Version 4.0 ?
The main upgrades to the Advantys configuration software made by Version 4.0 are as follows: Standardisation of the look and feel of the software. To simplify configuration of the Advantys STB, OTB, FTB and FTM systems. Improved I/O map for STB. New information tab for STB. Enhanced diagnostic data for Advantys STB modules. Inclusion of a new Advantys STB EtherNet/IP network interface module NIM (STB NIC 2212). Provision of TeSys T and TeSys U connectivity on CANopen STB extension. Enhanced graphic edito...
Read more - What are the new features introduced with version 2.0 of the Advantys configuration software?
Goals and Symptoms List the new features of the Advantys configuration software version 2.0 Facts and Changes New enhancements in Version 2.0 configuration software will require the NIM firmware to be upgraded to version 2.x.(indicated with *) Note that all version 2.0 NIM\'s will need Version 2.0 Configuration Software.Also bundled into this version is the ability to run Advantys Configuration Software for OTB, FTB and FTM. Causes and Fixes Export Feature: The Advantys STB PLC Image Generat...
Read more - How do you access the Advantys STB Interbus NIM\'s diagnostic registers?
This information is obtained by writing to the command word (1st output word of IO image) and then reading the Status word back (1st input word of IO image). Refer to the STBNIB2212 user guide for details of status bytes.
Read more - What is the replacement for the Advantys stbddi3420 digital input module?
The replacement is the STBDDI3420K. The \'K\' at the end of the part number designates kit. The kit now contains module, base and appropriate number of both spring and screw type connectors.
Read more - Upgrading Advantys Configuration Software Lite version 1.09 to to the full version 3.5 returns \'Failed to load license\' error.
Goals and Symptoms Upgrading Advantys Configuration Software Lite version 1.09 to to the full version 3.5 returns 'Failed to load license' error. Facts and Changes Advantys Configuration Software version 3.5 Causes and Fixes Attempts to upgrade the 'Advantys Configuration Software Lite version 1.09' to the 'Advantys Configuration Software version 3.5 will result in a 'Failed to load license' error. The 'Advantys Configuration Software Lite version 1.09' c...
Read more