Issue: Are there any interchangeable parts between the old XA2 and XB2 lines and the new XB4 and XB5 Harmony products? Product Line: 22mm Pushbuttons. Environment: Products sold in the United States. Cause: Product features. Resolution: No ....other than a few incandescent light bulbs CTA-ID : 2033545
Read more
Issue: What are the limitations for the wireless push buttons? Product Line: Harmony Environment: XB4/XB5 Harmony wireless push button Cause: Needs to know if the wireless push button will work for their application Resolution: 32 transmitters can be programmed to a receiver and a unlimited amount of receivers can be programmed to single transmitter.
Read more
Goals and Symptoms What is the level of protection to the mechanical shocks of the XB5S: IK index. Facts and Changes XB5S Mechanical shocks IK Causes and Fixes The XB5S is IK03. Legacy KB System (APS) Data: RESL200556 V1.0, Originally authored by LaBe on 11/23/2009, Last Edited by LaBe on 11/23/2009 Related ranges: Harmony XB5S
Read more
Goals and Symptoms When you have a power failure or when you switch off the power, the outgoing of XB5S will be have the last Status, that means, that the outgoing is in \'Switch on\' Position. Is this true? It is dangerous when you have switched a function and you can't set it back after power failure. Is this known for you? Causes and Fixes They have a PNP or NPN transistor output. This means that when the product is not powered anymore, the transistor output will not be triggered, and the ou...
Read more
Goals and Symptoms How long does the biometric switch keeps the storaged records without power alimentation ? Facts and Changes Biometric key switch XB5S Causes and Fixes The records are stored in a flash memory. It is comparable to an USB key. There is no battery. It can keep the records for more than a year. Legacy KB System (APS) Data: RESL197914 V1.0, Originally authored by LaBe on 02/27/2009, Last Edited by LaBe on 02/27/2009 Related ranges: Harmony XB5
Read more
Connections | a in mm | a in in. | b in mm | b in in. |
---|---|---|---|---|
By screw clamp terminals or plug-in connector | 40 | 1.57 | 30 | 1.18 |
By Faston connectors | 45 | 1.77 | 32 | 1.26 |
On printed circuit board | 30 | 1.18 | 30 | 1.18 |
Dimensions in mm
Dimensions in in.
The cumulative tolerance must not exceed 0.3Â mm / 0.012Â in.: T1 + T2 = 0.3Â mm max.
Minimum thickness of circuit board: 1.6Â mm / 0.06Â in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB5AZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ006: 0.6Â N.m (5.3Â lbf.in) max.
Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:
every 90Â mm / 3.54Â in. horizontally (X), and 120Â mm / 4.72Â in. vertically (Y).
with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
1 2 elongated holes for ZBZ006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ01•.
1 N/O
1 N/C
1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C
Single contact
Double contact
Light block
Possible location