XX218A3PFM12
ultrasonic sensor cylindrical M18 - 2 filling levels - Sn 0.5 m - NO - M12
- Range of product
- OsiSense XX
- Sensor type
- Ultrasonic sensor
- Series name
- Application
- Sensor name
- XX2
- Sensor design
- Cylindrical M18
- Detection system
- Diffuse
- [Sn] nominal sensing distance
- 0.5 m adjustable with remote teach push-button
- Material
- Plastic
- Type of output signal
- Discrete
- Discrete output function
- 1 NO
- Wiring technique
- 3-wire
- Discrete output type
- PNP
- [Us] rated supply voltage
- 12...24 V DC with reverse polarity protection
- Electrical connection
- Male connector M12 4 pins
- Product specific application
- For 2 filling levels monitoring
- [Sd] sensing range
- 0.051...0.508 m
- Beam angle
- 6 °
- IP degree of protection
- IP67 conforming to IEC 60529
- Enclosure material
- Valox
- Front material
- Epoxy
- Thread type
- M18 x 1
- Supply voltage limits
- 10...28 V DC
- [Sa] assured operating distance
- 0.051...0.508 m (teach mode)
- Maximum differential travel
- 2.5 mm
- Blind zone
- 0...51 mm
- Transmission frequency
- 300 kHz
- Repeat accuracy
- 1.27 %
- Deviation angle from 90° of object to be detected
- -7...7 °
- Minimum size of detected object
- Cylinder diameter 2.5 mm at 0.15 m
- Status LED
- 1 LED (dual colour) for setting-up assistance
1 LED (green) for supply on
1 LED (yellow) for output state - Current consumption
- 40 mA
- Maximum switching current
- 100 mA with overload and short-circuit protection
- Voltage drop
- < 1 V
- Delay first up
- 100 ms
- Delay response
- 15 ms
- Delay recovery
- 1000 ms
- Marking
- CE
- Threaded length
- 43 mm
- Height
- 18 mm
- Width
- 18 mm
- Depth
- 79 mm
- Product weight
- 0.033 kg
- Standards
- IEC 60947-5-2
- Product certifications
- CCSAus
UL - Ambient air temperature for operation
- -20...65 °C
- Ambient air temperature for storage
- -40...80 °C
- Vibration resistance
- +/-1 mm conforming to IEC 60068-2-6 10...55 Hz
- Shock resistance
- 30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
- Resistance to electrostatic discharge
- 8 kV level 4 conforming to IEC 61000-4-2
- Resistance to electromagnetic fields
- 10 V/m level 3 conforming to IEC 61000-4-3
- Resistance to fast transients
- 1 kV level 3 conforming to IEC 61000-4-4
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Go to CaP for more details
- Product end of life instructions
- End of Life Information
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- Osisense XX _UL certificate of our XX* ultrasonic sensors
Please find hereafter the UL certificates NRKH.E480783 of our XX* ultrasonic sensors, considered as \'proximity switches\' in the UL classification https://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRKH.E480783&ccnshorttitle=Proximity+Switches&objid=1085369061&cfgid=1073741824&version=versionless&parent_id=1073990407&sequence=1
Read more - What is the alternative for the OsiSense Inductive sensor xsch203629?
The alternative sensor is the XS9C4A2A2N12 https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=XS9C4A2A2N12
Read more - What is the difference between Diffuse adjustable,Polarised reflex and Thru-Beam in OsiSense sensor?
For difference between theses sensing mode please refer Detection for Automation solution Osi Sense. Page no 5/16. Please refer below link for more information https://www.arteanet.it/doc/Schneider/SCH_stranieri/Rilevamento_EN/00_summary.pdf
Read more - What is the part code for a replacement contact block for OsiSense limit switch ZCKM1H29?
XE2SP2151 1N/O + 1N/C Snap action https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=XE2SP2151
Read more - Osisense XC_XCMN211AL1 switch datasheet
XCMN211AL1 basic limit switch is not a standard one (not shown into Osisense XC catalogue). It is an adapted switch requested by an Italian OEM. It is in fact an XCMN2110L1 switch (snap action contacts) assembled with the end plunger with silicone protective boot \'ZCE1A\' not sold separately and 1m cable length. The closest standard complete switch is the XCMN2110L1. Attached its datasheet. It cannot replace the XCMN211AL1 switch because the plunger head with protective boot is longer. Logistic situation...
Read more
