Dimensions
TM171OFM22R
$360.36
Special Order-Generally ships in 14 to 21 Business Days
SKU
TM171OFM22R
Modicon M171 Optimized Flush mounting 22 I/Os, Modbus
Main
- Range of product
- Modicon M171/M172
- Product or component type
- Controller
- Product specific application
- HVAC and pumping solution
- Variant
- Programmable
- Number of inputs/outputs
- 22
- Discrete input number
- 6
- Discrete output number
- 1 for open collector
3 for relay outputs SPST with same common
2 for relay outputs SPST with independent common - Discrete output current
- 2 A for relay
- Analogue input number
- 3 analog input NTC
2 configurable - Analogue output number
- 3 voltage, range: 0...10 V
2 PWM/PPM, range: 20 kHz, 12 V, 35 mA
Complementary
- Number of port
- 1 LAN expansion bus
1 RS485 - screw terminal block (Modbus serial link) - Input/output number
- 5 analog output(s)
6 digital input(s)
5 analog input(s)
6 digital output(s) - Discrete input logic
- Sink or source (positive/negative)
- Contacts usage
- Volt-free contacts
- Analogue input type
- Voltage 0...1 V
Voltage 0...5 V (ratiometric)
NTC temperature probe - 50...100 °C - res.: 0.1 °C
Voltage 0...10 V
Current 0...20 mA/4...20 mA - Sensor power supply
- 12 V DC at 85 mA
5 V DC at 20 mA - [Us] rated supply voltage
- 24 V
12...24 V
Offer Sustainability
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Reference not containing SVHC above the threshold
Write Your Own Review
Frequently Asked Questions and Answers
- Where can I find the M171 M172 Catalog?
March 2018 Catalog HVAC Catalog.pdf
Read more - Reverse PID mode in Modicon M241/M251
There is no input to select between direct/inverse direction at the PID function block from the Util library. The FB_PID function block (Toolbox library) is from Schneider and has additional features. With FB_PID function block from the Toolbox library in SoMachine to change the regulation direction user can use negative P-factor (i_rKp) The basic PID function must remain the same.
Read more - Can we use 800 IOs with Modicon m580 Safety System without impact TUV certification
There is no issue to use 800 series IOs without any impact on TÜV certificate on a M580 Safety configuration. As a general rule, all of Remote Distributed equipments on Ethernet allowed in M580 system could be considered as “non-interfering” for Safety M580 modules. However, of course, 800 series IOs data are not supposed to be used to perform safety functions.
Read more - Video: Setting Persistent Variables with the Modicon M221 in SoMachine Basic
The video demonstrates how to set up persistent variables and save them in the memory words of SoMachine Basic.
Read more - Video: Creating IODDTs for Modicon m340 I/O Modules via Unity Pro
The attached video will illustrate creating 3 IODDTs for an M340 IO module: One for the Module health itself. One for Channel 0 using T_DIS_OUT_GEN which has two components. One for Channel 1 using T_DIS_OUT_STD which has 22 components.
Read more
Software - Released
User guide
Catalogue
Instruction sheet
CAD
Certificate
REACh Declaration
RoHs Declaration
Dimensions Drawings
Mounting and Clearance
Mounting on Panel with the Special Brackets Provided
Connections and Schema
Power Supply
(1)
Type T fuse (Controller: 1.25 A , Expansion: 1 A)
Wiring Diagram
N :
Neutral
GND :
Ground
BK :
Black
BU :
Blue
RD :
Red
AI :
Analogue input
AO :
Analogue output
DI :
Digital input
DO :
Digital output
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech