Issue Does Schneider have any recommendations for higher capacity shunts with the battery monitor? Environment Battery Monitor with a large DC system Product Family Conext Battery Monitor Cause Current shunt is rated too low, and/or seems to be getting too hot while inverting or charging. Resolution Below is a table from the Battery Monitor Owner's Guide recommending Deltec shunts for various capacities. The shunt that comes with the Battery Monitor is rated for 350A continuou...
Read more
There are three monitoring options offered with the BCPM: BCPMA -- Advanced: power and energy per circuit and mains BCPMB -- Intermediate: current per circuit, power and energy per mains BCPMC -- Basic: current only per circuit and mains A complete part number includes the BCMP model, the CT spacing, the number of CTs, and the branding identifier. BCPM (A, B, or C) (0 or 1) (42 or 84) (S or D) A = Advanced B = Intermediate C = Basic 0 (zero) = 3/4\' spacing between CTs on strips 1 (one) = 1\' spacing...
Read more
&nbs...
Read more
If logic is being used to turn an output on/off based on the value of a process value compared to a setpoint there is the possibility that the process value may \'flutter\' just above and below the setpoint value. This behaviour would cause the output to continuously cycle on and off which could potentially cause damage to the output and exhibit unwanted behaviour. Hysteresis logic can be used to provide an \'ON\' setpoint as well as an \'OFF\' setpoint. The output would only turn on once the...
Read more
How to edit online using CAM5. 1. Stop Debugging or (Shift+5). 2. Edit changes on workbench program. (see attached file of what can be edited). 3. Then In solution explorer Build solution or (CTRL+SHIFT+B) or use the build solution icon. 4. The online changes Icon should turn from grayed out to active. Click the online changes and then start debugging. Performing Online Changes CAM5.pdf
Read more