Dimensions
STBDDO3705KC
$747.40
Special Order-Generally ships in 14 to 21 Business Days
SKU
STBDDO3705KC
basic digital output kit STB - 24 V DC - 16 O
Main
- Range of product
- Modicon STB distributed I/O solution
- Product or component type
- Basic digital output kit
- Kit composition
- STBDDO3705 module
STBXBA3000 base
STBXTS2180, 18-terminal spring clamp connector - Discrete output number
- 16
- Discrete output type
- Solid state
- Discrete output voltage
- 24 V
- Discrete output voltage type
- DC
Complementary
- Discrete output current
- 500 mA
- Discrete output logic
- Positive
- Output voltage
- 19.2...30 V DC
- Absolute maximum voltage
- 35 V 1.3 ms
- Response time
- 2 ms off-to-on
2 ms on-to-off - Cold swapping
- Yes
- Hot swapping fallback
- No for basic NIMs
- Protection type
- Reverse polarity protection
Short-circuit protection
Thermal overload protection
Power protection integrated fuse on PDM time lag 5 A - Insulation between channels and logic bus
- 1500 V for 1 minute
- Leakage current
- <= 0.4 mA at state 0 30 V
- Load capacitance
- <= 10 µF
- Load inductance
- <= 1000 mH 4 Hz
- Reset
- Manual reset COM fault
- Product compatibility
- I/O base STBXBA3000
Power distribution module STBPDT3100/3105 - [Us] rated supply voltage
- 24 V DC
- Supply
- Power distribution module
- Current consumption
- 135 mA 5 V DC logic bus
- Marking
- CE
- Overvoltage category
- II
- Status LED
- 1 LED green module status (RDY)
1 LED per channel green channel status (OUT1 to OUT16) - Height
- 13.9 mm
- Depth
- 70 mm
- Width
- 128.3 mm
- Product weight
- 0.086 kg
Environment
- Standards
- EN/IEC 61131-2
- Product certifications
- CSA
FM Class 1 Division 2
UL - Pollution degree
- 2 IEC 60664-1
- Operating altitude
- <= 2000 m
- IP degree of protection
- IP20 EN 61131-2 class 1
- Ambient air temperature for operation
- 0...60 °C without
- Ambient air temperature for operation
- 32...140 °F without
- Ambient air temperature for storage
- -40...85 °C without
- Ambient air temperature for storage
- -40...185 °F without
- Relative humidity
- 95 % 60 °C without condensation
- Vibration resistance
- +/-0.35 mm 10...58 Hz
3 gn 58...150 Hz 35 x 7.5 mm symmetrical DIN rail
5 gn 58...150 Hz 35 x 15 mm symmetrical DIN rail - Shock resistance
- 30 gn 11 ms IEC 88 reference 2-27
Offer Sustainability
- Sustainable offer status
- Green Premium product
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Go to CaP for more details
- Product environmental profile
- Product Environmental Profile
- Product end of life instructions
- End of Life Information
Contractual warranty
- Warranty period
- 18 months
Write Your Own Review
Frequently Asked Questions and Answers
- What is the minimum spacing requirements above and below an Advantys STB island segment?
For proper heat dissipation, allow a minimum clearance of 100mm (3.94in.) above and below each island segment.
Read more - Are there any Advantys input modules that are sourcing (true low)?
No. All of the Advantys input modules are sink modules. Legacy KB System (APS) Data: RESL212843 V1.0, Originally authored by DiSa on 10/23/2013, Last Edited by DiSa on 10/23/2013 Related ranges: Modicon STB
Read more - Are there any 24 volt DC true low modules available for Advantys STB?
No, there are no 24 volt DC true low modules available for Advantys. Legacy KB System (APS) Data: RESL174065 V4.0, Originally authored by MiRo on 11/15/2007, Last Edited by DaSo on 11/28/2012 Related ranges: Modicon STB
Read more - Is the memory or SIM card required for Advantys STB?
No, the removable memory card is optional since the NIMs have flash memory. When the configuration software is not used and the system is auto-configured, the configuration is saved to flash only. To use the removable SIM card, the configuration software is required and an action to Save to the SIM card has to be performed while online.
Read more - Are there any isolated analog input modules available in the Advantys STB I/O offer ?
Yes, there are two analog input modules which are isolated. The STBAVI0300, analog voltage input module and the STBACI0320, analog current input module. R-120517 Legacy KB System (APS) Data: RESL211368 V1.0, Originally authored by DaSo on 05/04/2013, Last Edited by DaSo on 05/04/2013 Related ranges: Modicon STB
Read more
Catalogue
Certificate
Declaration of conformity
End of life manual
Marine certificate
Product environmental
REACh Declaration
RoHs Declaration
Dimensions Drawings
Connections and Schema
Wiring Diagram
Example
16 two-wire actuators
# | Group 1 | # | Group 2 |
|---|---|---|---|
1 | Channel 1, Connector A, Actuator | 11 | Channel 1, Connector B, Actuator |
2 | Channel 2, Connector A, Actuator | 12 | Channel 2, Connector B, Actuator |
3 | Channel 3, Connector A, Actuator | 13 | Channel 3, Connector B, Actuator |
4 | Channel 4, Connector A, Actuator | 14 | Channel 4, Connector B, Actuator |
5 | Pin 9, Connector A (not used) | 15 | Pin 9, Connector B (not used) |
6 | Channel 5, Connector A, Actuator | 16 | Channel 5, Connector B, Actuator |
7 | Channel 6, Connector A, Actuator | 17 | Channel 6, Connector B, Actuator |
8 | Channel 7, Connector A, Actuator | 18 | Channel 7, Connector B, Actuator |
9 | Channel 8, Connector A, Actuator | 19 | Channel 8, Connector B, Actuator |
10 | Pin 18, Connector A (not used) | 20 | Pin 18, Connector B (not used) |
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech