Shape of pin: Flat (PCB type)
Average resistance: 1440 Ohm (AC) at 20 °C +/- 10 %
[Ue] rated operational voltage: 16.8...36 V DC
[Ui] rated insulation voltage: 400 V conforming to EN/IEC 60947
[Uimp] rated impulse withstand voltage: 3.6 kV conforming to IEC 61000-4-5
Contacts material: Silver alloy (AgNi)
[Ie] rated operational current: 12 A, NO (AC-1/DC-1) conforming to IEC

6 A, NC (AC-1/DC-1) conforming to IEC
Minimum switching current: 100 mA
Maximum switching voltage: 250 V DC conforming to IEC
Switching voltage: 5 V
Maximum switching capacity: 3000 VA/336 W
Load current: 12 A at 250 V AC

12 A at 28 V DC
Minimum switching capacity: 500 mW at 100 mA / 5 V
Operating rate: <= 600 cycles/hour under load

<= 18000 cycles/hour no-load
Mechanical durability: 30000000 cycles
Electrical durability: 100000 cycles (12 A at 250 V, AC-1) NO

100000 cycles (6 A at 250 V, AC-1) NC
Operating time: 20 ms operating

20 ms reset
Average coil consumption: 0.45 W DC
Drop-out voltage threshold: >= 0.1 Uc DC
Safety reliability data: B10d = 100000
Protection category: RT I
Operating position: Any position
Product weight: 0.014 kg
Device presentation: Complete product

Environment

Dielectric strength: 1000 V AC between contacts

2500 V AC between poles

5000 V AC between coil and contact
Standards: CSA C22.2 No 14

EN/IEC 61810-1

UL 508
Product certifications: CSA

UL

EAC
Ambient air temperature for storage: -40...85 °C
Vibration resistance: +/- 1 mm (f = 10...55 Hz) conforming to EN/IEC 60068-2-6
IP degree of protection: IP40 conforming to EN/IEC 60529
Shock resistance: 10 gn for11 ms not operating conforming to EN/IEC 60068-2-27

5 gn for11 ms in operation conforming to EN/IEC 60068-2-27
Ambient air temperature for operation: -40...85 °C (DC)

Contractual warranty

Write Your Own Review

What is the base for the Zelio relay RPM22B7?

The part name is as follows: RPZF2
Read more
Compatibility Zelio Relays - LC1 contatactors

Goals and Symptoms Compatibility Zelio Relays - LC1 contactors Facts and Changes RSB, RXM, RUM, RPM, RPF Causes and Fixes See the compatibility Relais-contatactors LC1 in attached file Attachments (Removed File URL: 202897_F286/Compatibility_Relays_-__LC1_contactors_-EN.zip)(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/c15014bdccbc8581c125775f003cba78/fl_block_5/0.524?OpenElement&FieldElemFormat=gif) Legacy KB System (APS) Data: RESL202897 V1.0, Originally a...
Read more
What is the alternative for the RM4UA33MW zelio relay?

The Zelio relay RM22UA33MR. Data sheet attached. RM22UA33MR.pdf
Read more
What is the Zelio relay SR1*201bd scan frequency?

Issue: What is the Zelio relay SR1*201BD scan frequency? Product Line: Zelio Relays and Timers Environment: All Products Cause: Product Features Resolution: The cycle time is 8ms and has a response time of 14 - 26ms. CTA-ID : 2012071
Read more
Are SR1 Zelio relays NPN/PNP selectable in the inputs?

Issue: Are SR1 Zelio relays NPN/PNP selectable in the inputs? Product Line: Zelio Relays and Timers Environment: All Products Cause: Product Features Resolution: They are a PNP input only CTA-ID : 2002575
Read more

Catalogue

Certificate

Declaration of conformity

Product environmental

RXG... Interface Plug-in Relay - Zelio Relay, Product Environmental Profile (pdf)

RSB... Interface Plug-in Relay - ZELIO Relays, Product Environmental Profile (pdf)

Dimensions

Wiring Diagram

NOTE: For DC input, A1 have to be +, otherwise it would short circuit from protection module

Electrical Durability of Contacts

Durability (inductive load) = durability (resistive load) x reduction coefficient.

Resistive AC load

Switching capacity (kVA)

Durability (Number of operating cycles)

Reduction coefficient for inductive AC load (depending on power factor cos Ï•)

Reduction coefficient (A)

Maximum switching capacity on resistive DC load

Voltage DC

Current DC

Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.

RSB1A120BD

interface plug-in relay - Zelio RSB - 1 C/O - 24 V DC - 12 A