LUB32
$245.91
Generally ships in 1 to 2 days
SKU
LUB32
power base - TeSys U - 32 A - screw clamps control
Main
- Range
- TeSys
- Product name
- TeSys U
- Device short name
- LUB
- Product or component type
- Non reversing power base
- Device application
- Motor
- Poles description
- 3P
- Suitability for isolation
- Yes
- [Ith] conventional free air thermal current
- 32 A
- Utilisation category
- AC-41
AC-43
AC-44 - [Uc] control circuit voltage
- 110...220 V DC
110...240 V AC 50/60 Hz
24 V AC 50/60 Hz
24 V DC
48 V AC 50/60 Hz
48...72 V DC
Complementary
- Auxiliary contact composition
- 1 NO + 1 NC
- Auxiliary contacts type
- Type linked contacts (1 NO + 1 NC) conforming to IEC 60947-4-1
Type mirror contact (1 NC) state of the power conforming to draft IEC 60947-1 - [Ue] rated operational voltage
- 230 V
440 V
500 V
690 V - Network frequency
- 40...60 Hz
- [Ie] rated operational current
- 21 A at 690 V
23 A at 500 V
32 A at <= 440 V - [Ics] rated service breaking capacity
- 10 kA 500 V
4 kA 690 V
50 kA 230 V
50 kA 440 V - Typical current consumption
- 200 mA at 24 V DC I maximum while closing with LUCM
220 mA at 24 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD
220 mA at 24 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD
25 mA at 110...220 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD
25 mA at 110...240 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD
280 mA at 110...220 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD
280 mA at 110...240 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD
280 mA at 48...72 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD
280 mA at 48...72 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD
45 mA at 48...72 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD
45 mA at 48...72 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD
75 mA at 24 V DC I rms sealed with LUCM
80 mA at 24 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD
90 mA at 24 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD - Safety reliability level
- B10d 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 - Operating time
- 35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM for control circuit
50 ms at >= 72 V closing with LUCA, LUCB, LUCC, LUCD for control circuit
60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD for control circuit
65 ms closing with LUCM for control circuit
70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD for control circuit - Mechanical durability
- 15000000 cycles
- Operating rate
- 60 cyc/mn
- [Ui] rated insulation voltage
- 600 V conforming to CSA C22.2 No 14
600 V conforming to UL 508
690 V conforming to IEC 60947-1 3 - [Uimp] rated impulse withstand voltage
- 6 kV conforming to IEC 60947-6-2
- Safe separation of circuit
- 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1 appendix N
400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 appendix N - Connections - terminals
- Power circuit : screw clamp terminals 2 cable 1.5...6 mm² - cable stiffness: flexible - without cable end
Control circuit : screw clamp terminals 1 cable 0.34...1.5 mm² - cable stiffness: flexible - with cable end
Control circuit : screw clamp terminals 1 cable 0.75...1.5 mm² - cable stiffness: flexible - without cable end
Control circuit : screw clamp terminals 1 cable 0.75...1.5 mm² - cable stiffness: rigid - without cable end
Control circuit : screw clamp terminals 2 cable 0.34...1.5 mm² - cable stiffness: flexible - with cable end
Control circuit : screw clamp terminals 2 cable 0.75...1.5 mm² - cable stiffness: flexible - without cable end
Control circuit : screw clamp terminals 2 cable 0.75...1.5 mm² - cable stiffness: rigid - without cable end
Power circuit : screw clamp terminals 1 cable 1...10 mm² - cable stiffness: rigid - without cable end
Power circuit : screw clamp terminals 1 cable 1...6 mm² - cable stiffness: flexible - with cable end
Power circuit : screw clamp terminals 1 cable 2.5...10 mm² - cable stiffness: flexible - without cable end
Power circuit : screw clamp terminals 2 cable 1...6 mm² - cable stiffness: flexible - with cable end
Power circuit : screw clamp terminals 2 cable 1...6 mm² - cable stiffness: rigid - without cable end - Tightening torque
- Control circuit : 0.8...1.2 N.m - with screwdriver 5 mm flat
Control circuit : 0.8...1.2 N.m - with screwdriver 5 mm Philips no 1
Power circuit : 1.9...2.5 N.m - with screwdriver 6 mm flat
Power circuit : 1.9...2.5 N.m - with screwdriver 6 mm Philips No 2 - Width
- 45 mm
- Height
- 145 mm
- Depth
- 126 mm
- Product weight
- 0.9 kg
Environment
- Heat dissipation
- 3 W for control circuit with LUCA, LUCB, LUCC, LUCD
1.8 W for control circuit with LUCM - Immunity to microbreaks
- 3 ms
- Immunity to voltage dips
- 70 % 500 ms conforming to IEC 61000-4-11
- Product certifications
- ABS
ASEFA
ATEX
BV
CCC
CSA
DNV
GL
GOST
LROS (Lloyds register of shipping)
UL - Standards
- CSA C22.2 No 14 type E
EN 60947-6-2
IEC 60947-6-2
UL 508 type E with phase barrier - IP degree of protection
- IP20 front panel and wired terminals conforming to IEC 60947-1
IP20 other faces conforming to IEC 60947-1
IP40 front panel outside connection zone conforming to IEC 60947-1 - Protective treatment
- TH conforming to IEC 60068
- Ambient air temperature for operation
- -25...60 °C with LUCM
-25...70 °C with LUCA, LUCB, LUCC, LUCD - Ambient air temperature for storage
- -40...85 °C
- Fire resistance
- 650 °C conforming to IEC 60695-2-12
960 °C parts supporting live components conforming to IEC 60695-2-12 - Operating altitude
- 2000 m
- Shock resistance
- 10 gn power poles open conforming to IEC 60068-2-27
15 gn power poles closed conforming to IEC 60068-2-27 - Vibration resistance
- 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-27
4 gn 5...300 Hz power poles closed conforming to IEC 60068-2-27 - Resistance to electrostatic discharge
- 8 kV level 3 in open air conforming to IEC 61000-4-2
8 kV level 4 on contact conforming to IEC 61000-4-2 - Resistance to radiated fields
- 10 V/m 3 conforming to IEC 61000-4-3
- Resistance to fast transients
- 2 kV class 3 serial link conforming to IEC 61000-4-4
4 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 - Non-dissipating shock wave
- 1 kV serial mode 24...240 V AC conforming to IEC 60947-6-2
1 kV serial mode 48...220 V DC conforming to IEC 60947-6-2
2 kV common mode 24...240 V AC conforming to IEC 60947-6-2
2 kV common mode 48...220 V DC conforming to IEC 60947-6-2 - Immunity to radioelectric fields
- 10 V conforming to IEC 61000-4-6
Offer Sustainability
- Sustainable offer status
- Green Premium product
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Reference not containing SVHC above the threshold
- Product environmental profile
- Product Environmental Profile
- Product end of life instructions
- End of Life Information
Contractual warranty
- Warranty period
- 18 months
Write Your Own Review
Frequently Asked Questions and Answers
- Can the LUB32 use the smaller (less than 12 amps) control units?
Issue:​ Can the LUB32 use the smaller (less than 12 amps) control units? Product Line: Tesys U Line Motor Starters Environment: North American Products Resolution: Yes, it can. That being said the LUB12 cannot use the larger (greater than 12 amps) control modules.
Read more - Can the LUB12 with a LUCA*** control unit operate at 50hz ?
Yes , the product control rating is 50/60Hz, the frequency limits are 40-60hz CTA-ID : 2054376
Read more - Using TeSys U with Grounded Neutral
Issue: Can the TeSys U motor starters be used on a single phase system with a grounded neutral? Product Line: TeSys U - GIC Product LUB12, LUB32 Environment: US Product Cause: Product Application Resolution: Yes, these starters can be used in this type of setup. If the power wiring is grounded at the motor as well, an imbalance between hot and neutral can result which can cause nuisance tripping.
Read more - What is the difference between an LUB12 32 & lub120 320 Tesys U starter?
What is the difference between an LUB12 32 & LUB120 320 Tesys U starter? The Tesys U non reversing starter controller offers two types of power base units in its range LUB12 & LUB120 (0 – 12A, 5.5kw at 400V) LUB32 & LUB320 (0 – 32A, 15kW at 400V) LUB12 & LUB32 power bases have gone through an evolutionary change. Pre 2010 wk36, the base unit was coloured black\white & the contact block LU9BN11 was removable. Post 2010 wk 36, the base unit is black, to de...
Read more - What are the operating and storage temperatures for a TeSys U-line starter?
Issue: What are the operating and storage temperatures for a U-line starter? Product Line: Digest 177 Section 18 : Contactors and Starters IEC Environment: North American Products Resolution: Storage temperature: -40 to +185 degrees F (-40 to +85 degrees C). Operation: Power bases with standard and advanced control units: -13 to +158 degrees F (-25 to +70 degrees C). (At temperatures above 60ï¾°C and up to 70ï¾°C, for starter-controller LUB32, leave a minimum gap of 9 mm between products). Power...
Read more
User guide
Instruction sheet
CAD
Certificate
Declaration of conformity
End of life manual
Product environmental
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech