FTM1AS04C12C

$1,637.02
Special Order-Generally ships in 14 to 21 Business Days
SKU
FTM1AS04C12C

compact IP67 modular I/O splitter box - Advantys FTM - 4I - 24 V DC - 12 bits

Main
Range of product
Advantys FTM
Product or component type
IP67 modular I/O splitter box
Splitter box type
Compact
Input/output number
4
Electrical connection
1 male connector M12 bus module or previous module

4 female connectors M12 actuator
Analogue output number
4
Analogue output range
0...20 mA

4...20 mA
Complementary
Internal current consumption
50 mA
[Ue] rated operational voltage
24 V DC
Supply current
<= 4 A
Cable distance between devices
30 m
Input filtering
1 ms
Analogue output resolution
12 bits
Output impedance
0 Ohm
Conversion time
0...1 ms
Output impedance
500 Ohm
Current per channel
1.6 A
Control threshold undervoltage
0...18 V
Status LED
1 LED per channel yellow channel status
Surge withstand
-1 kV signal conforming to IEC 61000-4-5

1 kV signal conforming to IEC 61000-4-5

0.5 kV ground/PE conforming to IEC 61000-4-5

0.5 kV power supply conforming to IEC 61000-4-5
Operating position
Any position
Fixing mode
By 2 screws
Tightening torque
1.5 N.m, M4 screw(s)
Product weight
0.13 kg
Environment
Product certifications
cULus
Ambient air temperature for operation
0...55 °C
Ambient air temperature for storage
-25...70 °C
IP degree of protection
IP67
Operating altitude
0...2000 m
Vibration resistance
15 gn conforming to IEC 68-2-6
Shock resistance
50 gn, for 11 ms conforming to IEC 68-2-27, EA tests
Resistance to electrostatic discharge
-4 kV in contact conforming to IEC 61000-4-2

4 kV in contact conforming to IEC 61000-4-2

-8 kV in air conforming to IEC 61000-4-2

8 kV in air conforming to IEC 61000-4-2
Resistance to radiated fields
10 V/m conforming to IEC 61000-4-3
Resistance to fast transients
-2 kV power supply conforming to IEC 61000-4-4

2 kV power supply conforming to IEC 61000-4-4

-2 kV signal conforming to IEC 61000-4-4

2 kV signal conforming to IEC 61000-4-4
Resistance to conducted disturbances
10 V conforming to IEC 61000-4-6
Contractual warranty
Warranty period
18 months
Write Your Own Review
You're reviewing:FTM1AS04C12C

   Frequently Asked Questions and Answers


  • What are the main upgrades of the Advantys configuration software made by Version 4.0 ?

    The main upgrades to the Advantys configuration software made by Version 4.0 are as follows: Standardisation of the look and feel of the software. To simplify configuration of the Advantys STB, OTB, FTB and FTM systems. Improved I/O map for STB. New information tab for STB. Enhanced diagnostic data for Advantys STB modules. Inclusion of a new Advantys STB EtherNet/IP network interface module NIM (STB NIC 2212). Provision of TeSys T and TeSys U connectivity on CANopen STB extension. Enhanced graphic edito...
    Read more

  • What are the new features introduced with version 2.0 of the Advantys configuration software?

    Goals and Symptoms List the new features of the Advantys configuration software version 2.0 Facts and Changes New enhancements in Version 2.0 configuration software will require the NIM firmware to be upgraded to version 2.x.(indicated with *) Note that all version 2.0 NIM\'s will need Version 2.0 Configuration Software.Also bundled into this version is the ability to run Advantys Configuration Software for OTB, FTB and FTM. Causes and Fixes Export Feature: The Advantys STB PLC Image Generat...
    Read more

  • How do you access the Advantys STB Interbus NIM\'s diagnostic registers?

    This information is obtained by writing to the command word (1st output word of IO image) and then reading the Status word back (1st input word of IO image). Refer to the STBNIB2212 user guide for details of status bytes.  
    Read more

  • What is the replacement for the Advantys stbddi3420 digital input module?

    The replacement is the STBDDI3420K. The \'K\' at the end of the part number designates kit. The kit now contains module, base and appropriate number of both spring and screw type connectors.
    Read more

  • Upgrading Advantys Configuration Software Lite version 1.09 to to the full version 3.5 returns \'Failed to load license\' error.

    Goals and Symptoms Upgrading Advantys Configuration Software Lite version 1.09 to to the full version 3.5 returns 'Failed to load license' error. Facts and Changes Advantys Configuration Software version 3.5 Causes and Fixes Attempts to upgrade the 'Advantys Configuration Software Lite version 1.09' to the 'Advantys Configuration Software version 3.5 will result in a 'Failed to load license' error. The 'Advantys Configuration Software Lite version 1.09' c...
    Read more

User guide
  • file image FTM1DP... Profibus-DP IP67 modular I/O splitter box (pdf) download image`
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech