Dimensions
Mounting on Symetrical (35 mm) Rail or Asymetrical Rail with Adaptor RHZ 66
ATS01N106FT
$577.58
Generally ships in 1 to 2 days
SKU
ATS01N106FT
soft starter for asynchronous motor - ATS01 - 6 A - 110..480V - 0.75..3 KW
Main
- Range of product
- Altistart 01
- Product or component type
- Soft starter
- Product destination
- Asynchronous motors
- Product specific application
- Simple machine
- Device short name
- ATS01
- Network number of phases
- 1 phase
- [Us] rated supply voltage
- 110...480 V - 10...10 %
- Motor power kW
- 3 kW 3 phases 400 V
0.75 kW 3 phases 230 V
1.1 kW 3 phases 230 V
2.2 kW 3 phases 400 V
0.75 kW 1 phase 230 V - Motor power hp
- 1 hp 3 phases 230 V
2 hp 3 phases 460 V
3 hp 3 phases 460 V
0.5 hp 3 phases 210 V
1.5 hp 3 phases 230 V - IcL starter rating
- 6 A
- Utilisation category
- AC-53B EN/IEC 60947-4-2
- Current consumption
- 30 A at nominal load
- Type of start
- Start with voltage ramp
- Power dissipation in W
- 1 W at full load and at end of starting
31 W in transient state
Complementary
- Assembly style
- With heat sink
- Function available
- Integrated bypass
- Supply voltage limits
- 99...528 V
- Supply frequency
- 50...60 Hz - 5...5 %
- Network frequency
- 47.5...63 Hz
- Output voltage
- <= power supply voltage
- [Uc] control circuit voltage
- 110 V AC +/- 10 % 30 mA
24 V AC/DC +/- 10 % 25 mA
240 V AC +/- 10 % 65 mA - Starting time
- 1 s 100
5 s 20
Adjustable from 1 to 5 s - Starting torque
- 30...80 % of starting torque of motor connected directly on the line supply
- Discrete output current
- 2 A DC-13
3 A AC-15 - Tightening torque
- 0.8 N.m
- Electrical connection
- Cage type connector rigid 1 2.5 mm² AWG 14 control circuit
Cage type connector rigid 1 2.5 mm² AWG 14 power circuit
Cage type connector rigid 2 1 mm² AWG 17 control circuit
Cage type connector rigid 2 1 mm² AWG 17 power circuit
Cage type connector flexible with cable end 1 2.5 mm² AWG 14 control circuit
Cage type connector flexible with cable end 1 2.5 mm² AWG 14 power circuit
Cage type connector flexible without cable end 1 2.5 mm² AWG 14 control circuit
Cage type connector flexible without cable end 1 2.5 mm² AWG 14 power circuit
Cage type connector flexible with cable end 2 0.75 mm² AWG 18 control circuit
Cage type connector flexible with cable end 2 0.75 mm² AWG 18 power circuit
Cage type connector flexible without cable end 2 1 mm² AWG 17 control circuit
Cage type connector flexible without cable end 2 1 mm² AWG 17 power circuit - Marking
- CE
- Operating position
- Vertical +/- 10 degree
- Height
- 100 mm
- Width
- 23 mm
- Depth
- 100 mm
- Product weight
- 0.16 kg
- Compatibility code
- ATS01N1
- Power range
- 0.55...1 kW at 200...240 V 1 phase
2.2...3 kW at 380...440 V 3 phases
0.55...1 kW at 200...240 V 3 phases
1.1...2 kW at 380...440 V 3 phases
1.1...2 kW at 200...240 V 3 phases - Motor starter type
- Soft starter
Environment
- Electromagnetic compatibility
- Damped oscillating waves level 3 IEC 61000-4-12
Electrostatic discharge level 3 IEC 61000-4-2
Immunity to electrical transients level 4 IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
Voltage/current impulse level 3 IEC 61000-4-5
Conducted and radiated emissions level B CISPR 11
Conducted and radiated emissions level B IEC 60947-4-2
EMC immunity EN 50082-2
Harmonics IEC 1000-3-2
Harmonics IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6
Micro-cuts and voltage fluctuation IEC 61000-4-11
EMC immunity EN 50082-1 - Standards
- EN/IEC 60947-4-2
- Product certifications
- B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
CCC
CSA
C-Tick
GOST
UL - IP degree of protection
- IP20
- Pollution degree
- 2 EN/IEC 60947-4-2
- Vibration resistance
- 1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6
1 gn 13...150 Hz EN/IEC 60068-2-6 - Shock resistance
- 15 gn 11 ms EN/IEC 60068-2-27
- Relative humidity
- 5...95 % without condensation or dripping water EN/IEC 60068-2-3
- Ambient air temperature for operation
- -10...40 °C without derating
40...50 °C with current derating of 2 % per °C - Ambient air temperature for storage
- -25...70 °C EN/IEC 60947-4-2
- Operating altitude
- <= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m
Contractual warranty
- Warranty period
- 18 months
Write Your Own Review
Frequently Asked Questions and Answers
- Does the ats01 come with a shorting contactor?
Issue: Does the ATS01 come with a shorting contactor? Product Line: Altistat 01 Environment: All Cause: N/A Resolution: All of the ALTISTART 01 models, except the ATS01N103FT and ATS01N106FT, have an internal shorting contactor as standard.
Read more - Which power phases are controlled by Altistart 01 Soft-Starter?
The power phases that are controlled by Altistart 01 Soft-Starter are as follows: In N1 Range of Altistart 01 Soft-Starter only 1 Phase is controlled and that is L1, L2 and L3 are uncontrolled. In N2 Range of Altistart 01 Soft-Starter only 2 Phases are controlled and that is L2 and L3, L1 is uncontrolled.
Read more - Do the Altistart 01 soft-starters have any available spare parts?
Issue: Do the Altistart 01 soft-starters have any available spare parts? Product Line: Altistart 01 Environment: All serial numbers for Altistart 01 Cause: N/A Resolution: There are no spare parts available for the Altistart 01 soft-starters
Read more - What are the dimensions for the ats01n230ly and ats01n244ly?
Issue: What are the dimensions for the ATS01N230LY and ATS01N244LY? Product Line: Altistart 01 Environment: All Cause: N/A Resolution: Both units have the same dimensions: 4.96 (126 mm) inches deep 5.75 (146 mm) inches tall 7.09 (180 mm) inches wide
Read more - Does the ats01 softstart require external thermal overload protection?
Issue: Does the ATS01 softstart require external thermal overload protection? Product Line: ATS01, Altistart 01 Environment: All Cause: N/A Resolution: The ATS01 softstart does require an external overload thermal protection for the motor. It also requires a starter or a contactor to be used at the line of the softstart.
Read more
Catalogue
Instruction sheet
CAD
Certificate
End of life manual
Dimensions Drawings
Connections and Schema
Example of 3-phase Power Supply Connection
(1)
A line contactor must be used in the sequence.
A1 :
Soft starter
Q1 :
Motor circuit-breaker
KM1 :
Contactors
F1, F2 :
Control protection fuses
S1, S2 :
Pushbuttons
Technical Description
Function Diagram
Us :
Power supply voltage
Uc :
Control supply voltage
LED 1 :
Green LED
LED 2 :
Yellow LED
Um :
Motor voltage
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech