Racks for Modules Mounting
Dimensions of Modules and Racks
(1)
2 slots
(2)
3 slots
(3)
4 slots
(4)
6 slots
(5)
10 slots
(6)
16 slots
140CRA93100C
$5,792.09
Special Order-Generally ships in 14 to 21 Business Days
SKU
140CRA93100C
RIO drop adaptor module Modicon Quantum - 1 connector with single cable
Main
- Range of product
- Modicon Quantum automation platform
- Product or component type
- RIO drop adaptor module
Complementary
- Product compatibility
- Quantum
- Number of I/O expansion module
- <= 27
- Type of cable
- Coaxial 75 Ohm
- Transmission rate
- 1544 Mbit/s
- Dynamic range
- 35 dB
- Isolation voltage
- 500 V DC coaxial center and ground
- Electrical connection
- 1 female connector F elbowed with single cable
- Diagnostics startup
- Executive checksum
Power up and runtime
RAM address/data - Power dissipation in W
- 3 W 1 channel
- Bus current requirement
- 600 mA 1 channel
- Module format
- Standard
Environment
- Resistance to electromagnetic fields
- 10 V/m 80...1000 MHz conforming to IEC 801-3
- Ambient air temperature for operation
- 0...60 °C
- Ambient air temperature for storage
- -40...85 °C
- Relative humidity
- 95 % without condensation
- Operating altitude
- <= 5000 m
- Protective treatment
- Conformal coating Humiseal 1A33
- Standards
- CSA C22.2 No 142
CUL
UL 508 - Resistance to electrostatic discharge
- 4 kV contact conforming to IEC 801-2
8 kV on air conforming to IEC 801-2
Offer Sustainability
- Sustainable offer status
- Green Premium product
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Reference not containing SVHC above the threshold
- Product environmental profile
- End of Life Information
- Product end of life instructions
- Available
Contractual warranty
- Warranty period
- 18 months
Write Your Own Review
Frequently Asked Questions and Answers
- Do you have a Modicon Quantum PLC 140 Series CPU Programming Cable?
No. Unfortunately, we no longer do a programming cable for this older range of PLC, but a simple wiring diagram attached. Doc1.pdf
Read more - Which Modbus functions are used for reading/writing multiple data on IO scanning in Modicon Quantum range.
In Modicon Quantum range, I/O scanning works with following Modbus function codes: FC3 for Reading Multiple 4X registers. FC16 for Writing Multiple 4X registers. If both the read and write are filled out then FC23 for Read/Write Multiple 4X registers is used.
Read more - Security notification – Modicon™ Quantum PLC (ICS-ALERT-12-020-03b)
Release Notice Schneider Electric® has become aware of the release of a metasploit module allowing a user to send a stop command to or modify the PLC program of a Modicon Quantum PLC Goals and Symptoms The ability to send commands from Unity Pro software or over UMAS to the controller was already identified in ICS-ALERT-12-020-03 and a response is available in Schneider Electric Resolution 207378. This resolution expands on that. Causes and Fixes Follow the recommendations found in the atta...
Read more - Can I configure and add a new NOE to my proworx32 Modicon Quantum Hot Standby configuration without taking the process offline?
No. This constitutes a configuration change. Mismatched configurations are not allowed in a Modicon Quantum Hot Standby system.
Read more - What is the Standby Modbus Serial Port address offset in a Modicon Quantum Hot Standby System?
By default, the Standby Modbus Serial Port is offset by 128 from the Primary. This offset can be turned off. Reference the user guide for the respective Modicon Quantum family you are using.
Read more
Catalogue
Firmware - Updates
Certificate
Declaration of conformity
End of life manual
REACh Declaration
RoHs Declaration
Dimensions Drawings
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech