XX230A11PA00M12

$906.60
Special Order-Generally ships in 14 to 21 Business Days
SKU
XX230A11PA00M12

ultrasonic sensor cylindrical M30 - 2 filling levels - Sn 1 m - 2NO - M12

Main
Range of product
OsiSense XX
Sensor type
Ultrasonic sensor
Series name
Application
Sensor name
XX2
Sensor design
Cylindrical M30
Detection system
Diffuse
[Sn] nominal sensing distance
1 m adjustable with teach push-button
Material
Plastic
Type of output signal
Discrete
Discrete output function
1 NO + 1 NC
Wiring technique
4-wire
Discrete output type
PNP
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Electrical connection
Male connector M12 4 pins
Product specific application
For 2 filling levels monitoring
[Sd] sensing range
0.051...0.991 m
Beam angle
10 °
IP degree of protection
IP67 conforming to IEC 60529
Complementary
Enclosure material
ULTEM
Front material
Silicone
Thread type
M30 x 1.5
Supply voltage limits
10...28 V DC
Function available
Without synchronisation mode
[Sa] assured operating distance
0.051...0.991 m (teach mode)
Maximum differential travel
2.5 mm
Blind zone
0...51 mm
Transmission frequency
200 kHz
Repeat accuracy
0.9 %
Deviation angle from 90° of object to be detected
-10...10 °
Minimum size of detected object
Cylinder diameter 1.6 mm at 0.635 m
Status LED
1 LED (green/red (flashing)) for output state

1 LED (green/red (flashing)) for setting-up assistance

1 LED (yellow) for distance indication
Current consumption
100 mA
Maximum switching current
100 mA with overload and short-circuit protection
Voltage drop
< 1 V
Delay first up
1000 ms
Delay response
150 ms
Delay recovery
1000 ms
Marking
CE
Threaded length
45 mm
Height
35 mm
Width
35 mm
Depth
85 mm
Product weight
0.091 kg
Environment
Standards
IEC 60947-5-2
Product certifications
CCSAus

UL
Ambient air temperature for operation
0...50 °C
Ambient air temperature for storage
-10...80 °C
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 10...55 Hz
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Resistance to electrostatic discharge
8 kV level 4 conforming to IEC 61000-4-2
Resistance to electromagnetic fields
10 V/m level 3 conforming to IEC 61000-4-3
Resistance to fast transients
1 kV level 3 conforming to IEC 61000-4-4
Offer Sustainability
RoHS (date code: YYWW)
Schneider Electric declaration of conformity
REACh
Go to CaP for more details
Product end of life instructions
End of Life Information
Contractual warranty
Warranty period
18 months
Write Your Own Review
You're reviewing:XX230A11PA00M12

   Frequently Asked Questions and Answers


  • Osisense XX _UL certificate of our XX* ultrasonic sensors

    Please find hereafter the UL certificates NRKH.E480783 of our XX* ultrasonic sensors, considered as \'proximity switches\' in the UL classification https://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRKH.E480783&ccnshorttitle=Proximity+Switches&objid=1085369061&cfgid=1073741824&version=versionless&parent_id=1073990407&sequence=1
    Read more

  • What is the alternative for the OsiSense Inductive sensor xsch203629?

    The alternative sensor is the XS9C4A2A2N12 https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=XS9C4A2A2N12
    Read more

  • What is the difference between Diffuse adjustable,Polarised reflex and Thru-Beam in OsiSense sensor?

    For difference between theses sensing mode please refer Detection for Automation solution Osi Sense. Page no 5/16. Please refer below link for more information https://www.arteanet.it/doc/Schneider/SCH_stranieri/Rilevamento_EN/00_summary.pdf
    Read more

  • What is the part code for a replacement contact block for OsiSense limit switch ZCKM1H29?

    XE2SP2151 1N/O + 1N/C Snap action https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=XE2SP2151
    Read more

  • Osisense XC_XCMN211AL1 switch datasheet

    XCMN211AL1 basic limit switch is not a standard one (not shown into Osisense XC catalogue). It is an adapted switch requested by an Italian OEM. It is in fact an XCMN2110L1 switch (snap action contacts) assembled with the end plunger with silicone protective boot \'ZCE1A\' not sold separately and 1m cable length. The closest standard complete switch is the XCMN2110L1. Attached its datasheet. It cannot replace the XCMN211AL1 switch because the plunger head with protective boot is longer. Logistic situation...
    Read more

Instruction sheet
  • file image XX230A..PA00M12 Ultrasonic Sensor for emptying or filling, Instruction Sheet (pdf) download image`
End of life manual
  • file image XX..., SC..., VM... and SM... Ultrasonic sensors, Product End-of-Life Instructions (pdf) download image`
Product environmental
  • file image XX518A3PAL2 Ultrasonic Sensor, Product Environmental Profile (pdf) download image`
REACh Declaration
  • file image ultrasonic sensor cylindrical M30 - 2 filling levels - Sn 1 m - 2NO - M12 (pdf) download image`
RoHs Declaration
  • file image ultrasonic sensor cylindrical M30 - 2 filling levels - Sn 1 m - 2NO - M12 (pdf) download image`

Dimensions Drawings

Dimensions





Mounting and Clearance

Minimum Mounting Distances
Side by side



e :
respect the distances indicated on the detection curves
Face to face



e >
4 x Sn


Connections and Schema

Wiring Diagram

NO + NO outputs, PNP



(1)
(+) Brown
(2)
NO output (White)
(3)
(-) Blue
(4)
NO output (Black)
BN
Brown
WH
White
BU
Blue
BK
Black


Performance Curves

Curves



(1)
Parallel movement
(2)
Distance
(3)
Blind zone for diffuse sensors.


Operating Curves



(1)
Adjustable detection zone
(2)
Output deactivated
(3)
Output activated
(4)
NO output


© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech