XENG3781
latching contact block - 2 NO - front mounting
- Range of product
- Harmony XAC
- Product or component type
- Contact block
- Component name
- XENG
- Electrical circuit type
- Control circuit
- Contact block application
- Single speed
- Contact block type
- Double
- Type of operator
- Latching
- Product compatibility
- XACA
- Contacts type and composition
- 2 NO
- Mounting of block
- Front mounting
- Contact operation
- Slow-break
- Connections - terminals
- Screw clamp terminals, connection capacity: 1 x 0.5...1 x 2.5 mm² without cable end
Screw clamp terminals, connection capacity: 1 x 0.5...2 x 1.5 mm² with cable end - Mechanical durability
- 1000000 cycles
- Contact code designation
- A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A
A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A
Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A
Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A - [Ithe] conventional enclosed thermal current
- 10 A
- [Ui] rated insulation voltage
- 600 V (degree of pollution: 3) conforming to IEC 60947-1
- [Uimp] rated impulse withstand voltage
- 6 kV conforming to IEC 60947-1
- Resistance across terminals
- <= 25 MOhm
- Operating force
- 15 N
- Short-circuit protection
- 10 A fuse protection by cartridge fuse type gG
- Rated operational power in W
- 40 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
48 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
65 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C - Terminals description ISO n°1
- (13-14)NO
B - Terminals description ISO n°2
- (13-14)NO
B
- Standards
- EN/IEC 60947-5-1
UL 508
CSA C22.2 No 14 - Ambient air temperature for operation
- -25...70 °C
- Ambient air temperature for storage
- -40...70 °C
- Vibration resistance
- 15 gn (f = 10...500 Hz) conforming to IEC 60068-2-6
- Shock resistance
- 100 gn conforming to IEC 60068-2-27
- Overvoltage category
- Class II conforming to IEC 61140
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- What is the part number for 6 hole pendant station with emergecy stop?
There is no single part number for 6 hole pendant station with emergency stop it is made up of : XACA06 + XACA9412 + ZA2BS844 + ZB2BE101 + ZB2BE102 + LABELS to SUIT +++++ XACA06 XACA9412  ...
Read more - What is Difference between zb2be101 and zb2be101c?
The references with \'C\' at the end are products built in China and these products are dedicated to Chinese market. In fact the material used with suffix \'C\' is degraded compare to part reference without \'C\'. If ZB2BE101C needs to be replaced by ZB2BE101 than it is possible because they are same in size. Functionality wise there is no difference between both.  For further information, Please visit: https://www.schneider-electric.com.au/en/product-range-selector/661-harmony-xac/?p_url=http%3A%2F%2...
Read more - Is the ZB4BP3 harmony pushbutton IP rated?
Yes the ZB4BP3 is rated to IP69K.
Read more - Video: Resetting a Harmony XB5R Wireless Push Button Receiver
Issue: Reset the Wireless Receiver on the XB5R Wireless Push Button Product Line: Push Button and Operator Interface Environment: XB5R Wireless Push Buttons Resolution: 1. Hold down both buttons simultaneously 2. Wait for all of the lights to start flashing 3. Press both buttons down again until they go solid 4. Remove your fingers 5. Your device is now reset
Read more - What code is a Harmony flashing LED light block 240vac?
ZBV18M1 = White ZBV18M3 = Green ZBV18M4 = Red ZBV18M5 = Yellow ZBV18M6 = Blue
Read more
