XDPD1111C1
joystick controller XDP - 8 directions - 1 NO contact per direction
- Range of product
- Harmony XK
- Product or component type
- Complete joystick controller
- Device short name
- XDP
- Mounting diameter
- 48 mm
- Bezel material
- Plastic
- Sale per indivisible quantity
- 1
- Operator position information
- 2 positions
- Operator direction information
- 1 direction
- Contacts type and composition
- 8 NO
- Contacts usage
- Standard
- Mechanical durability
- 1000000 cycles
- Return
- Spring return
- Height
- 158.6 mm
- Width
- 65 mm
- Depth
- 44 mm
- Product weight
- 0.5 kg
- Standards
- EN/IEC 60947-1
EN/IEC 60947-5-1
EN/IEC 60947-5-4
EN/IEC 60947-5-5
JIS C 4520
UL 508
CSA C22.2 No 14 - Ambient air temperature for operation
- -40...60 °C
- IP degree of protection
- IP65
Frequently Asked Questions and Answers
- What parts are available for replacement on the XDPD1111C1 joystick?
Issue: What parts are available for replacement on the XDPD1111C1 joystick? Product Line: Harmony Pushbuttons Environment: All Products Cause: Product Features Resolution: The contact blocks are the only replaceabe parts. They are the ZB2BE101 NO contact blocks. CTA-ID : 2048905
Read more - Is the ZB4BP3 harmony pushbutton IP rated?
Yes the ZB4BP3 is rated to IP69K.
Read more - Video: Resetting a Harmony XB5R Wireless Push Button Receiver
Issue: Reset the Wireless Receiver on the XB5R Wireless Push Button Product Line: Push Button and Operator Interface Environment: XB5R Wireless Push Buttons Resolution: 1. Hold down both buttons simultaneously 2. Wait for all of the lights to start flashing 3. Press both buttons down again until they go solid 4. Remove your fingers 5. Your device is now reset
Read more - What code is a Harmony flashing LED light block 240vac?
ZBV18M1 = White ZBV18M3 = Green ZBV18M4 = Red ZBV18M5 = Yellow ZBV18M6 = Blue
Read more - Video: How to configure Harmony XVU Tower Light color and illumination settings
Product Line: XVU Tower/Stack Light XVUC29 Resolution: On page three of three in the included instructions you will find two boxes.One labled Dial \'A\' and one labeled Dial \'B.\' Using these tables, select the features that you want. Then set the dials marked \'A\' and \'B\' on the top of your XVU unit to match your requirements. To change the dials you will need to use a small, flathead screwdriver. 157.198.234.35_Scan_to_Desktop_10-18-2016_08-22-59.pdf
Read more