Cause: What does the triangle with open circuit symbol displayed on exLhoist screen means? Product Line: Wireless remote control station exLhoist Environment: Applies to Harmony eXLhoist Resolution: This is caused by an open circuit of the safety loop input, customer has to refer to the wiring diagram to close the loop WP_20141118_001.jpg
Read more
Here is a pretested link for the procedure from L3 technical support for eXL hoist remote in our technical database named Box. This link successfully opened on 27-04-2016. https://schneider-electric.app.box.com/s/s4y2i1hbgwrssqfpy2vr47s6akz4guv5 The size of this zip file is just over 311 MB. During this training presentation it is a good idea to observe when our L3 technical support person inserts the screw, which operates a microswitch inside the remote. You will also need the eXL hoist configuration ...
Read more
Yes the ZB4BP3 is rated to IP69K.
Read more
Issue: Reset the Wireless Receiver on the XB5R Wireless Push Button Product Line: Push Button and Operator Interface Environment: XB5R Wireless Push Buttons Resolution: 1. Hold down both buttons simultaneously 2. Wait for all of the lights to start flashing 3. Press both buttons down again until they go solid 4. Remove your fingers 5. Your device is now reset
Read more
ZBV18M1 = White ZBV18M3 = Green ZBV18M4 = Red ZBV18M5 = Yellow ZBV18M6 = Blue
Read more