XALS2003H
ASI CONTROL STATION - 2 INPUTS/2 OUTPUTS H
- Range of product
- Harmony XAL
- Product or component type
- Control station
- Range compatibility
- AS-Interface cabling system
- Control station name
- XALS
- Device short name
- XALS
- Control station composition
- 2 illuminated push-buttons
- Control button type
- Green push-button marking: unmarked, spring return, flush 1 NO contact(s)
Red push-button marking: unmarked, spring return, flush 1 NC contact(s) - Supply
- Via AS-Interface line
- Actuator sensor interface profile [AS-i]
- S-B.A.E
- Parameter bits
- Not used
- Current consumption
- < 80 mA for AS-Interface line
- Switching voltage
- 24 V
- Switching current capacity
- 5 mA
- Light source
- LED, 24 V DC, 20 mA
- Protection type
- Short-circuit protection by LED indicators
- Width
- 68 mm
- Height
- 104 mm
- Depth
- 102 mm
- Enclosure material
- Polycarbonate
- Colour of base of enclosure
- Grey RAL 7021
- Colour of cover
- Grey RAL 7035
- Flame retardance
- V0 conforming to UL 94
- Mechanical durability
- 3000000 cycles
- Electrical connection
- 1 male connector M12
- Product weight
- 0.22 kg
- Product certifications
- AS-Interface No 72301
- Ambient air temperature for operation
- -25...70 °C
- Ambient air temperature for storage
- -40...70 °C
- IP degree of protection
- IP65
- Vibration resistance
- 5 gn (f = 2...500 Hz)
- Shock resistance
- 70 gn conforming to IEC 60068-2-27
- Fire resistance
- 960 °C conforming to NF C 20-455
Frequently Asked Questions and Answers
- Does Schneider Electric offer accessory cables for use with Berger Lahr n065 motors?
No, The Icla N065 and ICLA D065 are very old legacy products which are no longer offered in our catalogs. Therefore there are no accessory cables offered for use with the Berger Lahr N065 integrated drive type motors. Icla N065 and Icla D065 motors are still available for support of old machines. However, all cables used with Icla N065 and Icla D065 are required to be fabricated if needed. Rev 9-20-17
Read more - What is the Schneider Electric replacement for a Berger Lahr d065 with ID number 18001100058
The correct replacement for the Berger Lahr D065 with ID number 18001100058 is N065 with ID number 18001200058 18001200058 is available for order but requires an account type that is permitted to order legacy products. ( Account type PC54 ) Rev 9-20-17
Read more - What is the Schneider Electric replacement for the Berger Lahr VRDM3913/50 LNB motor with ID number 5212701600
The replacement for the VRDM3913/50 LNB motor with ID number 52127016000 is now Schneider Electric part number BRS39BN760ABA This is considered a Legacy product and can only be ordered through select distributors. rev 2-20-18
Read more - What is the Schneider Electric part number for the limit switches found on Berger Lahr linear axis type LM-p608?
The limit switches found on Berger Lahr linear axis type LM-P608 can be ordered from Schneider Electric using part number 52060001 Expect long lead times as for these are considered legacy products and must come from the factory in Germany. rev 3-12-18
Read more - Does Schneider offer a replacement for the Berger Lahr d065 Icla motor with ID number 59600100028?
The replacement model for replacing D065 with ID number 59600100028 is the model N065 of the Icla product line. The ordering number from Schneider Electric for the replacement is 18001200015 Please note that this is considered a legacy product and requires an account authorized for purchasing legacy products. rev 2-20-18
Read more