XACB961
adaptor for self-supporting cable XAC-B with protective cable sleeve - 10..22 mm
- Range of product
- Harmony XAC
- Product or component type
- Adaptor for self-supporting cable type BBAP
- Accessory / separate part type
- Adaptor
- Accessory / separate part category
- Adaptation accessory
- Accessory / separate part destination
- Protective cable sleeve for cable Ø 8...26 mm
- Product weight
- 0.025 kg
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- What is the part number for 6 hole pendant station with emergecy stop?
There is no single part number for 6 hole pendant station with emergency stop it is made up of : XACA06 + XACA9412 + ZA2BS844 + ZB2BE101 + ZB2BE102 + LABELS to SUIT +++++ XACA06 XACA9412  ...
Read more - What is Difference between zb2be101 and zb2be101c?
The references with \'C\' at the end are products built in China and these products are dedicated to Chinese market. In fact the material used with suffix \'C\' is degraded compare to part reference without \'C\'. If ZB2BE101C needs to be replaced by ZB2BE101 than it is possible because they are same in size. Functionality wise there is no difference between both.  For further information, Please visit: https://www.schneider-electric.com.au/en/product-range-selector/661-harmony-xac/?p_url=http%3A%2F%2...
Read more - Is the ZB4BP3 harmony pushbutton IP rated?
Yes the ZB4BP3 is rated to IP69K.
Read more - Video: Resetting a Harmony XB5R Wireless Push Button Receiver
Issue: Reset the Wireless Receiver on the XB5R Wireless Push Button Product Line: Push Button and Operator Interface Environment: XB5R Wireless Push Buttons Resolution: 1. Hold down both buttons simultaneously 2. Wait for all of the lights to start flashing 3. Press both buttons down again until they go solid 4. Remove your fingers 5. Your device is now reset
Read more - What code is a Harmony flashing LED light block 240vac?
ZBV18M1 = White ZBV18M3 = Green ZBV18M4 = Red ZBV18M5 = Yellow ZBV18M6 = Blue
Read more
