VZ3
TeSys VARIO - additional pole - 63 A - for V3
- Range
- TeSys
- Device short name
- VZ
- Product or component type
- Additional pole
- Performance level
- High performance
- Poles description
- 1P
- Contacts type and composition
- 1 NO
- Product compatibility
- V3
- Range compatibility
- TeSys VARIO switch disconnector
- Network type
- AC
DC - Network frequency
- 50/60 Hz
- Suitability for isolation
- Yes
- Mounting location
- Left
Right - [Ue] rated operational voltage
- 690 V AC 50/60 Hz
- [Uimp] rated impulse withstand voltage
- 8 kV
- [Ith] conventional free air thermal current
- 63 A
- [Ithe] conventional enclosed thermal current
- 50 A
- Mechanical durability
- 30000 cycles
- Electrical durability
- 30000 cycles DC-1...5
100000 cycles AC-21 - Connections - terminals
- Power circuit : screw clamp terminals cable 16 mm² - cable stiffness: flexible - with cable end
Power circuit : screw clamp terminals cable 25 mm² - cable stiffness: solid - Tightening torque
- Power circuit : 4 N.m - on screw clamp terminals
- Height
- 83 mm
- Width
- 20 mm
- Depth
- 46 mm
- Product weight
- 0.1 kg
- Standards
- IEC 60947-3
- Product certifications
- CSA
GL
UL - Protective treatment
- TC
- IP degree of protection
- IP20 conforming to IEC 60529
- Mechanical robustness
- Vibrations 10...150 Hz 1 gn IEC 60068-2-6
Shocks 11 ms 30 Gn IEC 60068-2-27 - Ambient air temperature for operation
- -20...50 °C
- Fire resistance
- 960 °C conforming to IEC 60695-2-1
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- What is the length of the shaft extension in the vccdn20?
Issue: What is the length of the shaft extension kit in the Mini-Vario Nema Type 1 & 12 Assembled Rear Mounting switch VCCDN20? Product Line: Mini-Vario & Vario Assembled and Enclosed switches. Environment: Mini-Vario & Vario UL 508 Disconnect Switches Cause: Assembly/wiring, Components Resolution: Please note that these shaft extension kits can be field modified to accommodate the depth of the panel. The two shafts extension kits for the VCCDN20 are listed below Door To Panel Distance:&nb...
Read more - What is the part number for shaft only for V1 type of switches?
The part number for shaft extension for V1 will be VZ17. For more information please follow the below link: https://www.schneider-electric.com/en/product/VZ17/tesys-vario---shaft-extension---for-v02...v2/
Read more - Are the LV Auxiliaries (vz20) for the Vario switch disconnector range rated for low voltage plc inputs?
Vario auxiliary device have not been designed to control PLC input. As such, Schneider Electric cannot guarantee correct operation when VZ20 is used in association with PLC input. For VZ20 we do not have information on minimum switching capacity as we have for TeSys DAuxiliary contact.
Read more - Are the TeSys K 3 pole reversing mini-contactors and overloads designed with provision for panel and din rail mounting capacities?
Issue: Are the TeSys K 3 pole reversing mini-contactors and overloads designed with provision for panel and din rail mounting capacities? Is there an accessory available that provides the separate mounting of the TeSys K overload modules which positions the overload block on the same din rail track as the contactor? Product Line: TeSys K 3 Pole Reversing & Non-Reversing Contactors, TeSys K accessories Environment: TeSys K Cause: Assembly/wiring Resolution: TeSys K mini-contactors are provided with...
Read more - What is the replacement for the Tesys D Contactor LC1D65U7?
use the new code - LC1D65AU7 3P EVERLINK CONTACTOR 65A 30kW AC3 240VAC See link for Data Sheet: https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=LC1D65AU7
Read more
