Dimensions
Dimensions in mm
a | b | c | G | H | Ø |
|---|---|---|---|---|---|
140 | 393 | 120 | 120 | 375 | 6 x 12 |
Dimensions in in.
a | b | c | G | H | Ø |
|---|---|---|---|---|---|
5.51 | 15.47 | 4.72 | 4.72 | 14.76 | 0.24 X 0.47 |
VW3A7703
$639.96
Special Order-Generally ships in 14 to 21 Business Days
SKU
VW3A7703
braking resistor - IP 20 - 28 Ohm - 200 W
Main
- Range of product
- Altivar
- Product or component type
- ATV61 braking resistor
ATV71 braking resistor - Range compatibility
- Altivar 312
Altivar 61
Altivar 71
Altivar 32
Altivar 31C
Altivar 312 Solar
Altivar Easy 310 - Product compatibility
- ATV31CD11N4
ATV31CD15N4
ATV71PD11N4Z
ATV71WD11N4
ATV71WD15N4
ATV312HU40M3
ATV312HD11N4
ATV312HD15N4
ATV61WD15N4
ATV61WD15N4C
ATV61WD18N4
ATV61WD18N4C
ATV312HD11S6
ATV312HD15S6
ATV32HD11N4
ATV32HD15N4
Variable speed drive ATV310 motor : 11 kW
ATV61HD18Y
ATV61HD22Y
ATV61HU30M3
ATV61HU40M3
ATV71HD11N4
ATV71HD15N4
ATV71HD15Y
ATV71HD18Y
ATV71HU30M3
ATV71HU40M3 - Average power available
- 200 W at 50 °C
231 W at 40 °C - Ohmic value
- 28 Ohm
Complementary
- Electrical connection
- <= 1.5 mm² terminal (AWG 16) for temperature control switch
<= 4 mm² terminal (AWG 28) for drive - Protection type
- Thermal protection via drive or temperature control switch at 120 °C
- [Ue] rated operational voltage
- 24 V DC 0.1 A
250 V AC 1 A - Contact resistance
- <= 60 µOhm
- Product weight
- 3.5 kg
Environment
- Ambient air temperature for operation
- 0...50 °C
- Ambient air temperature for storage
- -25...70 °C
- IP degree of protection
- IP20
Contractual warranty
- Warranty period
- 18 months
Write Your Own Review
Frequently Asked Questions and Answers
- What supplies the power to vw3a3401 encoder interface card fitted on Altivar 71?
The encoder interface card VW3A3401 uses an internal 5VDC supply from the drive control block. The interface card supplies 5VDC to the encoder RS422 with maximum current available up to 200mA.
Read more - When does the Drive Overheat Fault (OHF) occur in Altivar 71 Drives.
The Drive Overheat Fault (OHF) indicates that the heat sink temperature has crossed the temperature threshold. This is the information from the temperature sensor located on the heat sink, near the transistor module. When the Thermal Heat Dissipation (THD) is greater than 118% it trips in OHF. 118% is approximately 100 Deg Centigrade temperature on the heat sink. The main causes for the occurrence of this fault are: 1. Excessive ambient temperature. (Provide proper air cooling of the control roo...
Read more - Altivar 61/71 what is the recommended corrective action when the motor runs in reverse with a run forward command?
Issue: The motor is running backwards with a forward run command on the drive. Product line: Altivar ATV61 and ATV71 Environment: All models, all serial numbers Cause: The phase rotation is inverted coming out of the drive going to the motor. Resolution: Option 1: To correct the motor rotation swap two motor leads on the drive output terminals. Option 2: Go in the simple start menu 1.1 find output phase rotation change it from ABC to ACB. Refer to the ATV61 and ATV71 programm...
Read more - What does ramp increment mean for the Altivar 61/71?
Issue: What does ramp increment mean for the Altivar 61/71? Product Line: Altivar 61, Altivar 71 Environment: All serial numbers Cause: N/A Resolution: Ramp increment is a parameter that will change the resolution of the listed parameters: see below Inr M [Ramp increment] 0.01 - 0.1 - 1 0.1 0.01 [0.01]: Ramp up to 99.99 seconds 0.1 [0.1]: Ramp up to 999.9 seconds 1 [1]: Ramp up to 9,000 s...
Read more - Will the relay output, assigned to No Drive Fault, change states on a fault if Auto restart is set to yes on VFD?
Issue: Will the relay output, assigned to No Drive Fault, change states on a fault if Auto restart is set to yes? Product Line: Altivar 61 Altivar 71 ATV61 ATV71 Environment: All Cause: Define the No Drive Fault relay relationship with Auto restart function. Resolution: The relay assigned to No Drive Fault will not change states on a fault, if Auto restart is set to YES, until the max restart time is depleted and the fault still exists.
Read more
Catalogue
Instruction sheet
Catalogue Page
Dimensions Drawings
Mounting and Clearance
Clearance
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech