Tutorial for creating a Cascading Write_Read_Var in SoMachine 4.1 with Modicon M251 logic controller over Modbus TCP. Cascading_write_read_var.projectarchive
Read more
Tutorial for adding an Advantys CANopen OTB OTB1C0DM9LP through the TM251MESC Modicon M251 Ethernet CAN logic controller via SoMachine.
Read more
Tutorial for accessing SD card files via FTP client on Modicon M241 & M251 PLC (programmable logic controllers) which is commonly performed when logging system data.
Read more
Issue: Need to know the part numbers for the programming Software SoMachine version 4.3. Product Line: PLC Programming software Resolution: The part numbers for SoMachine version 4.3 are: - SOMNACS43 + trial license for V4.3 (21days) - USB flash drive. The USB flash drive is mandatory and supplied with a trial license. - SOMNACCZXSPAZZ 1 (Single License) - SOMNACCZXTPAZZ 10 (Team License) - SOMNACCZXEPAZZ 100 (Entity License) Supported controllers: - Logic controllers: Modicon M238, Modicon M241, Mod...
Read more
Attached is a project archive from SoMachine 4.3 that uses Ethernet IP protocol. You will need to add the M221 EDS file. This can also be converted to a M241 controller. The following video is a tutorial for configuring the Modicon M221 Nano PLC (programmable logic controller) as a remote I/O device for Modicon M251 Micro PLC with Dual Channel Communications. M251_with_M221RIO.projectarchive M221_EDS_Model.eds
Read more
NOTE: Keep adequate spacing for proper ventilation and to maintain an ambient temperature between -10°C (14°F) and 55°C (131°F).
NOTE: Expansion modules must be mounted above the controller.