Dimensions
ETB1EM16EPP0
$1,603.60
Special Order-Generally ships in 14 to 21 Business Days
SKU
ETB1EM16EPP0
Modicon ETB - Block 16 Input Modbus TCP/IP
Main
- Range of product
- Modicon ETB
- Product or component type
- I/O distributed module
- Number of input channels
- 16
- Module type
- Modbus TCP/IP
Complementary
- Input type
- Contact
- Input logic
- Positive
- Delay response
- 2.5 ms
- Output current
- 2 A per module
8 A per output - Output protection type
- Against short-circuits
- Switching frequency
- 200 Hz
- Short-circuit current
- 6.5 A
- [Us] rated supply voltage
- 24 V DC
- Connector type
- M12
- Standards
- IEC 60529
IEC 60068-2-8
Environment
- IP degree of protection
- IP67
- Ambient air temperature for operation
- > -25...70 °C
- Ambient air temperature for storage
- > -40...85 °C
- Vibration resistance
- 10 gn
Offer Sustainability
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- Product environmental profile
- Available
Contractual warranty
- Warranty period
- 18 months
Write Your Own Review
Frequently Asked Questions and Answers
- Reverse PID mode in Modicon M241/M251
There is no input to select between direct/inverse direction at the PID function block from the Util library. The FB_PID function block (Toolbox library) is from Schneider and has additional features. With FB_PID function block from the Toolbox library in SoMachine to change the regulation direction user can use negative P-factor (i_rKp) The basic PID function must remain the same.
Read more - Can we use 800 IOs with Modicon m580 Safety System without impact TUV certification
There is no issue to use 800 series IOs without any impact on TÜV certificate on a M580 Safety configuration. As a general rule, all of Remote Distributed equipments on Ethernet allowed in M580 system could be considered as “non-interfering” for Safety M580 modules. However, of course, 800 series IOs data are not supposed to be used to perform safety functions.
Read more - Video: Setting Persistent Variables with the Modicon M221 in SoMachine Basic
The video demonstrates how to set up persistent variables and save them in the memory words of SoMachine Basic.
Read more - Video: Creating IODDTs for Modicon m340 I/O Modules via Unity Pro
The attached video will illustrate creating 3 IODDTs for an M340 IO module: One for the Module health itself. One for Channel 0 using T_DIS_OUT_GEN which has two components. One for Channel 1 using T_DIS_OUT_STD which has 22 components.
Read more - Can I tell what the Modbus Plus address of my Modicon PLC is via 984 ladder logic?
Yes, the contents of the address configured in node 2 of the MSTR Instruction Function Code #3 (Get Local Statistics) will give you the Modbus Plus Network address of the PLC. Below is a example of a MSTR Instruction using Function Code #3 (Get Local Statistics) to get the Modbus Plus address of the PLC 400001 = 3 (Operation Type) 400003 = 1 (length) 400004 = 2 (Offset) 400010 = 2 (Network address of this station)
Read more
User guide
Catalogue Page
Certificate
Dimensions Drawings
Connections and Schema
I/O Assignments
Select the number of inputs/outputs according to the product characteristics in order to get the I/O assignment.
Power Connectors
1
output power (24V)
2
module/input power (24V)
3
module/input power (0V)
4
output power (0V)
2-Input Port
IEC Wiring Diagram with 2 Sensors
© 2018 Switchboard in a Box. All Rights Reserved. Design & Developed by Shaligram Infotech