BCPMB042S
BCPM power monitoring intermediate - 42 solid core 100 A - 19 mm CT spacing
- Range
- PowerLogic
- Product name
- PowerLogic BCPM
- Product or component type
- Multi-circuit energy meter
- Device short name
- BCPMB
- Variant
- Intermediate
- Power monitoring
- Basic instrumentation
- Energy management
- Sub billing and cost allocation
- Device application
- Sub billing
- Power quality analysis
- Voltage sag and swell detection
- Type of measurement
- Voltage
Current
Frequency
Active power
Power factor
Active energy - [Us] rated supply voltage
- 90...277 V, AC, 50/60 Hz +/- 1 %
- Network frequency
- 50 Hz
60 Hz
- Analogue input type
- Solid core CT, 100 A x 42
- Update time
- 1.8 s
- Measurement voltage
- 90...277 V phase to neutral
150...480 V phase to phase - Measurement accuracy
- 2 % branch current 0.25…2 A
1 % branch current 2…100 A
3 % mains current 1…100 %
3 % mains current 2…100 %
1 % voltage 90…277 V - Sampling rate
- 256 samples/cycle
- Connection pitch
- 19 mm
- Provided equipment
- 42 x current transformer
2 x cables - Communication port protocol
- Modbus RTU
- Communication port support
- RS485
- Communication of data
- Over voltage alarm
Under voltage alarm
High-high current alarm
High current alarm
Low current alarm
Low-low current alarm
- Mounting mode
- Panel-mounted
- Mounting support
- Enclosure
Panel - Relative humidity
- 95 % between 0...60 °C
- Ambient air temperature for storage
- -40...70 °C
- Operating altitude
- 3000 m
- Standards
- EN 61010
IEC 61036
UL 508
ANSI C12.1 - Product certifications
- UL
- Width
- 288 mm
- Height
- 146 mm
- Product weight
- 1.5 kg
- RoHS (date code: YYWW)
- Will not be compliant
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- Where can I find out more information about the Powerlogic Branch Circuit Monitoring?
Issue General information and guides for the Powerlogic Branch Circuit Power Meter (BCPM) product line are required. Product Line Powerlogic BCPM, BCPME Environment BCPM Documentation Resolution The Branch Circuit Monitoring System consists of a main board and up to 84 branch circuit CTs. The CTs can either be solid-core CTs assembled onto a long PCB Board or individual split-core CTs. For more information about product selection, installation, and function, feel free to explore the attached documents....
Read more - Branch Circuit Power Meter (BCPM) or Branch Circuit Power Meter Split Core (BCPMSC) read zero current for all CTs
Goals and Symptoms Symptoms The PowerLogic BCPM or BCPMSC shows 0A on every circuit, even though the panel the meter is monitoring has a load. The meter has been installed correctly and all CT connections are made. Causes and Fixes Cause If the ribbon cables are reseated while the BCPM is on, the unit will not register current. The BCPM does a discovery of the ribbon cables only upon bootup. If the ribbon cables are reseated or seated after bootup, the BCPM will not detect the current. Resolutio...
Read more - ION Setup Revision History and Features & Fixes
Issue The ION Setup revision history may be required. Product Line ION Setup Environment ION Setup Resolution Please see the table below for the revision history. To obtain the latest version of ION Setup software, refer to article FA212816 - Where can I download the latest version of ION Setup Software? Release Date Version File Name Bug Fixes New Features 6/21/2013 ION 3.0 Build 13172 IONSETUP30_B13172_01.EXE - CM3/CM4 Alarm log programming to a depth of 0 - PM53xx Meter Reset...
Read more - What device types are natively supported and compatible in ION Setup 3.0?
Issue A list of devices supported and / or compatible in the most recent version of ION Setup 3.0. Product Line ION Setup version 3.0.17073.01 Environment Supported Device types and compatiblity with ION Setup software Cause The posted ION Setup user manual is not updated as frequently as new software versions are released. The manual states that, “The devices supported by ION Setup are subject to change”. Resolution UPDATED 3/16/2017 The list below indicates devices that ar...
Read more - What are the part numbers for the BCPM (BCPME) with ethernet?
Issue Schneider Electric is pleased to announce the newest member of the PowerLogic Branch Circuit Power Meter (BCPM) series, the BCPM”E” with Ethernet communications. This version offers the widest range of communications options: SNMP, BACnet IP and Modbus TCP via Ethernet, and Modbus RTU or BACnet MS/TP via the RS-485 serial network port. It is capable of communicating Modbus protocol simultaneously with SNMP or BACnet for integration flexibility without gate...
Read more
