SKU:

BCPME242S

BCPM power monitoring advanced ethernet - 42 solid core 100A - 18mm CT spacing

$18,020.06
Availability: Please contact our sales team on 1300 724 622.
BCPM power monitoring advanced ethernet - 42 solid core 100A - 18mm CT spacing
Manufacturer: Veris Industries
This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for use in new build and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (100A solid core current transformers) on all branch channels. The BCPM monitors both the 42 branch circuits and mains values, incoming power and energy. All to provide information on the complete Power Distribution Unit. Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with serial connection for either Modbus RTU or BACnet MS/TP, and an Ethernet connection for Modbus TCP, BACnet IP and SNMP. The meter need to be powered by a 100V AC to 277V AC supply source. Include 2 21-CTs board strips with 18mm spacing between each CT connectors, for 42 circuits. The device dimensions are 353mm in width, 253mm in height, 71mm in depth and weight 1.5 kilograms.

Products specifications

Attribute name Attribute value
Main
Device short name BCPME
Device application sub billing
[Us] rated supply voltage 90...277 V AC 50/60 Hz +/- 1 %
Range PowerLogic
Market segment healthcare cost management: cost allocation: panelboard, data center cost management: cost allocation: panelboard, healthcare cost management: billing: panelboard, data center cost management: billing: panelboard
Power monitoring basic instrumentation
Type of measurement active energy, power factor, active power, frequency, current, voltage
Range of product PowerLogic
Power quality analysis voltage sag and swell detection
Energy management sub billing and cost allocation
Product name PowerLogic BCPM
Product or component type multi-circuit energy meter
Variant advanced + ethernet
Network frequency 60 Hz, 50 Hz
Complementary
Update time 1.8 s
Measurement accuracy voltage 1 % 90…277 V, mains current 3 % 2…100 %, mains current 3 % 1…100 %, branch current 1 % 2…100 A, branch current 2 % 0.25…2 A
Communication of data low current alarm, high current alarm, low-low current alarm, over voltage alarm, under voltage alarm, high-high current alarm
Communication port protocol SNMP v2, Modbus TCP, BACnet MS/TP, BACnet IP, Modbus RTU
Connection pitch 18 mm
Communication port support ETHERNET, RS485
Analogue input type solid core CT 100 A42 x
Provided equipment 2 x cables, 42 x current transformer
Number of inputs 0
Number of outputs 0
Sampling rate 256 samples/cycle
Measurement voltage 150-480 V phase to phase, 90-277 V phase to neutral
Environment
Relative humidity 0-95 % at 0-60 °C
Ambient air temperature for storage -40-70 °C
Mounting mode panel-mounted
Product certifications UL
Height 307 mm
Operating altitude 3000 m
Depth 71 mm
Width 253 mm
Net weight 1.5 kg
Mounting support enclosure, panel
Standards EN 61010, ANSI C12.1, UL 508, IEC 61036
Packing Units
Unit Type of Package 1 1
Number of Units in Package 1 1
Package 1 Height 33.1 cm
Package 1 Width 33.1 cm
Package 1 Length 76.2 cm
Package 1 Weight 7.008 kg