A9MEM2000T
modular single phase power meter iEM2000T - 230V - 40A without display
- Range
- Acti 9
- Product name
- Acti 9 iEM2000
- Device short name
- IEM2000T
- Product or component type
- Energy meter
- Poles description
- 1P + N
- Type of measurement
- Active power
- Device application
- Sub billing
- Accuracy class
- Active energy : class 1 according to IEC 62053-21
- Analogue input type
- Direct input
- [In] rated current
- 40 A
- Rated voltage
- 230 V +/- 20 %
- Network frequency
- 50 Hz
60 Hz - Frequency measurement range
- 48...62 Hz
- Technology type
- Electronic
- Display type
- Without display
- Sampling rate
- 32 samples/cycle
- Measurement current
- 0...40 A
- Display digits
- 0
- Maximum value measured
- 999999.9 kWh
- Communication port protocol
- -
- Communication port support
- -
- Local signalling
- Indicator light (green) : power ON
Indicator light (yellow) : metering and activity 3200 p/kWh - Number of inputs
- 0
- Number of outputs
- 1 pulse
- Output voltage
- 5...35 V DC (20 mA)
- Impulse duration
- 120 ms
- Power consumption in VA
- <= 10 VA
- Mounting mode
- Clip-on
- Mounting support
- DIN rail
- Connections - terminals
- Power circuit : bottom tunnel type terminals for 1 10 mm²
Remote transfer : top tunnel type terminals for 1 4 mm² - Tightening torque
- Power circuit : 1.2 N.m
Remote transfer : 0.8 N.m - Standards
- IEC 61557-12
IEC 62053-21 - Product certifications
- CE
- IP degree of protection
- IP40 conforming to IEC 60529
- Ambient air temperature for operation
- -20...70 °C at < 32 A
-20...55 °C at >= 32 A - Ambient air temperature for storage
- -40...70 °C
- Relative humidity
- 95 % at 55 °C
- Colour
- White
- 9 mm pitches
- 2
- Width
- 18 mm
- Height
- 95 mm
- Depth
- 67 mm
- Product weight
- 0.073 kg
- Product environmental profile
- Available
- Product end of life instructions
- Available
- Sustainable offer status
- Green Premium product
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Reference not containing SVHC above the threshold
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- Do we have single pole Watt hour meter in 63 amp and resettable?
Part number A9MEM2105 has a resettable counter in the front . Please refer the below linkhttps://www.schneider-electric.com.au/en/product-range-selector/61083-acti-9-iem2000-series/?p_url=http%3A%2F%2Fwww.ops-ecat.schneider-electric.com%2Fecat%2Fbrowse.do%3Fconf%3Dnull%26el_typ%3Dproduct%26range_id%3D61083%26prd_id%3DA9MEM2105%26scp_id%3DAU_en
Read more - Is there a D-Curve RCBO available?
No, unfortunately we do not have this part in our range. However, we can offer a D-Curve breaker in the Acti 9 Series (A9F55***) as well as a add-on Vigi block RCD. *** = Number of poles followed by the amp rating E.g. 4 pole 32Amp would be A9F55432. See Below for List of Blocks:
Read more - What is the physical difference between the c120h and the ic120h?
There are no physical differences. They are same dimensions will fit in the same spot. It is just the part name change to match the Acti 9 series.
Read more - What is the replacement for ME3ZR, 17076 Meter?
The replacement for ME3ZR, 17076 Meter is A9MEM3110 A9MEM3110 For more information see : https://www.schneider-electric.com.au/en/product-range-selector/61273-acti-9-iem3000-series/?p_url=http%3A%2F%2Fwww.ops-ecat.schneider-electric.com%2Fecat%2Fbrowse.do%3Fconf%3Dnull%26el_typ%3Dproduct%26range_id%3D61273%26prd_id%3DA9MEM3110%26scp_id%3DAU_en
Read more - Which KWH meter will measure Solar inputs with Modbus connections?
Can go with part number A9MEM3255 , unless it is DC input. Please refer the below link for more information, https://www.schneider-electric.com.au/en/product-range-selector/61273-acti-9-iem3000-series/?p_url=http%3A%2F%2Fwww.ops-ecat.schneider-electric.com%2Fecat%2Fbrowse.do%3Fconf%3Dnull%26el_typ%3Dproduct%26range_id%3D61273%26prd_id%3DA9MEM3255%26scp_id%3DAU_en
Read more
