A9D11806
iC60H - earth leakage circuit breaker - 1P + N - C curve - 6 A - 30m A - 240 V
- Circuit breaker application
- Distribution
- Range
- Acti 9
- Product name
- Acti 9 iC60 RCBO
- Product or component type
- Residual current breaker with overcurrent protection (RCBO)
- Device short name
- IC60H RCBO
- Poles description
- 1P + N
- [In] rated current
- 6 A at 50 °C
- Earthing system
- TN
- Curve code
- C
- Earth-leakage sensitivity
- 30 mA
- Breaking capacity
- Icn : 10000 A - 240 V - AC at 50/60 Hz
- Neutral position
- Left
- Number of protected poles
- 1
- Device location in system
- Outgoer
- Network type
- AC
- Network frequency
- 50 Hz
- [Ue] rated operational voltage
- Ue: 240 V - AC at 50/60 Hz
- Trip unit technology
- Thermal-magnetic
- Residual current tripping technology
- Voltage dependent
- Earth-leakage protection time delay
- Instantaneous
- Earth-leakage protection class
- Type A
- [Icw] rated short-time withstand current
- Icw: 250 A during 8/20 µs impulse withstand
- [Ics] rated service breaking capacity
- Ics: 7500 A - 240 V - AC at 50/60 Hz
- Limitation class
- 3
- [Ui] rated insulation voltage
- Ui: 400 V - AC at 50/60 Hz
- [Uimp] rated impulse withstand voltage
- Uimp: 4 kV
- Suitability for isolation
- Yes
- Contact position indicator
- Yes
- Control type
- Toggle
- Local signalling
- ON/OFF indication
- Mounting mode
- Clip-on
- Mounting support
- DIN rail
- Comb busbar and distribution block compatibility
- NO
- 9 mm pitches
- 2
- Height
- 110 mm
- Width
- 18 mm
- Depth
- 77.5 mm
- Product weight
- 205 g
- Colour
- White
- Mechanical durability
- 20000 cycles
- Electrical durability
- 5000 cycles
- Provision for padlocking
- Padlockable with padlock Ø 4 mm
- Locking options description
- ON/OFF locking facilities
- Connections - terminals
- Screw clamp terminal connection on top - 1...25 mm² - rigid - without cable end
Screw clamp terminal connection on top - 1...16 mm² - flexible
Screw clamp terminal connection on bottom - 1...16 mm² - rigid - without cable end
Screw clamp terminal connection on bottom - 1...10 mm² - flexible - Wire stripping length
- 13 mm on bottom of power circuit
14 mm on top of power circuit - Tightening torque
- 3.5 N.m on top of power circuit
2 N.m on bottom of power circuit - Earth-leakage protection
- Integrated
- Standards
- IEC 61009-1
BS EN 61009-1
IEC 61009-2-2
AS/NZS 61009.1 - IP degree of protection
- IP20
- Tropicalisation
- 2
- Relative humidity
- 95 % at 55 °C
- Ambient air temperature for operation
- -15...60 °C
- Ambient air temperature for storage
- -40...85 °C
- Sustainable offer status
- Green Premium product
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Go to CaP for more details
- Product environmental profile
- Product Environmental Profile
- Product end of life instructions
- End of Life Information
Frequently Asked Questions and Answers
- Is there a lock dog for ic60 RCBO?
Yes, there is a padlocking device. The part number is A9A27049 and it comes in lots of 10. For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=A9A27049
Read more - What are the part numbers for Padlocking device which will go on LHS and RHS of Acti 9 ic60 and RCBO\'s?
Part number A9A26380 is for mounting on the left side of Circuit Breaker. Part number A9A26381 is for mounting on the Right side of Circuit breaker. For further details please follow the below link, https://www.tracepartsonline.net/(S(jj1xcpflpzf1tyxwjtna0vip))/partdetails.aspx?PartID=10-02112015-105620&class=SCHNEIDER_ELECTRIC_DISTRI&clsid=/SCHNEIDER_DISTRI/F_SCHNEIDER_DISTRI/SCHNEIDER_DISTRI.030/SCHNEIDER_DISTRI.030.010/
Read more - How can I make 1 Pole 10 Amps B Curve 30ma RCBO?
To make 1 Pole 10 Amps B Curve 30mA RCBO, you need the following: A9F53110 - 1 Pole 10 Amps B Curve Breaker (https://www.schneider-electric.com.au/en/search/A9F53110) + A9V02663 - 2 Pole 30mA 63 Amps Add-on Vigi to suit 1 Pole iC60 Breakers (https://www.schneider-electric.com.au/en/search/A9F53110) Please note the total width of this combination will be equal to 3 Poles standard RCBO (3 x 18mm)
Read more - ETSNZ - Are acti9 ic60 MCBs suitable for DC applications?
Yes, Acti9 iC60N/H MCBs are suitable for DC applications ranging from 12VDC to 250VDC subject to the number of poles connected in series and the required breaking capacity. The attached document shows the number of poles that are required to be connected in series in relation to the supply voltage and the breaking capacity that is achieved. Acti9_iC60.pdf
Read more - What is the magnetic tripping threshold of the ic60 and older c60 circuit breakers used in DC network?
The magnetic tripping threshold of the Acti 9 and older Multi 9 circuit breakers is higher than in alternating current. The magnetic tripping threshold is determined based on the attached documents. Acti 9.pdf Multi 9.JPG
Read more
