A9C65216
Reflex iC60H Ti24 16 A 2P curve C integrated control MCB
- Device application
- Control
Distribution - Range
- Acti 9
- Product name
- Reflex iC60
- Device short name
- Reflex iC60H
- Product or component type
- Integrated control circuit breaker
- Poles description
- 2P
- Number of protected poles
- 2
- Network type
- AC
- Trip unit technology
- Thermal-magnetic
- Curve code
- C
- [In] rated current
- 16 A
- Network frequency
- 50/60 Hz
- Breaking capacity code
- H
- Breaking capacity
- Icu 30 kA at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2
Icu 15 kA at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2 - [Ui] rated insulation voltage
- 500 V AC
- Contact position indicator
- Yes
- Control type
- Remote control by continuous command
Remote control by pulse
Toggle
ON/OFF button - Control signal type
- Impulse
Maintained
Maintained very low voltage - Local signalling
- Red LED: fault
Flashing LED: device overheat
Flashing LED: device ready
Flashing LED: device tripped
Green LED: device ON - [Uc] control circuit voltage
- 230 V AC 50/60 Hz
24 V AC 50/60 Hz
24 V DC
48 V AC 50/60 Hz
48 V DC - [Us] rated supply voltage
- 230 V AC 50/60 Hz
- Mounting mode
- Fixed
- Mounting support
- 35 mm symmetrical DIN rail
- 9 mm pitches
- 9
- Height
- 84 mm
- Width
- 81 mm
- Depth
- 77 mm
- Colour
- White
- Mechanical durability
- 50000 cycles
- Electrical durability
- AC-1 : 50000 cycles AC 50 Hz
- Provision for padlocking
- Padlockable
- Locking options description
- Padlock in OFF position
- Earth-leakage protection
- Separate block
- Product compatibility
- With PLC
- IP degree of protection
- IP20 conforming to IEC 60529
- Pollution degree
- 3
- Tropicalisation
- 2
- Relative humidity
- 93 % ( 40 °C )
- Sustainable offer status
- Green Premium product
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Reference not containing SVHC above the threshold
- Product environmental profile
- Available
- Product end of life instructions
- Available
- Warranty period
- 18 months
Frequently Asked Questions and Answers
- ETSNZ - Are acti9 ic60 MCBs suitable for DC applications?
Yes, Acti9 iC60N/H MCBs are suitable for DC applications ranging from 12VDC to 250VDC subject to the number of poles connected in series and the required breaking capacity. The attached document shows the number of poles that are required to be connected in series in relation to the supply voltage and the breaking capacity that is achieved. Acti9_iC60.pdf
Read more - What is the difference between Diffuse adjustable,Polarised reflex and Thru-Beam in OsiSense sensor?
For difference between theses sensing mode please refer Detection for Automation solution Osi Sense. Page no 5/16. Please refer below link for more information https://www.arteanet.it/doc/Schneider/SCH_stranieri/Rilevamento_EN/00_summary.pdf
Read more - What is the magnetic tripping threshold of the ic60 and older c60 circuit breakers used in DC network?
The magnetic tripping threshold of the Acti 9 and older Multi 9 circuit breakers is higher than in alternating current. The magnetic tripping threshold is determined based on the attached documents. Acti 9.pdf Multi 9.JPG
Read more - Whats the difference between the reflex mode and the polarised reflex mode on photo-electric Sensors?
See attachment Reflex Vs Polarized Reflex.JPG
Read more - What is the 4 pole vigi unit that fits the Acti 9 ic60, 3 pole and 4 pole circuit breakers?
The 4 pole Vigi unit is the A9V02763. See below for more information https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=A9V02763
Read more
