SKU:

BCPMSCE1S

2 adapter boards - advanced + ethernet - full power and energy on all circuits

$15,681.42
Availability: Please contact our sales team on 1300 724 622.
2 adapter boards - advanced + ethernet - full power and energy on all circuits
Manufacturer: Schneider Electric
This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM allow the monitoring of both the branch circuits and mains values, incoming power and energy for a maximum of 42 circuits. All to provide information on the complete Power Distribution Unit. Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with serial connection for either Modbus RTU or BACnet MS/TP, and an Ethernet connection for Modbus TCP, BACnet IP and SNMP. The meter need to be powered by a 100V AC to 277V AC supply source. This version is for 42 circuits, but do not include branch current transformers nor ribbon. The device dimensions are 353mm in width, 253mm in height, 71mm in depth and weight 1.5 kilograms.

Products specifications

Attribute name Attribute value
Main
Device short name BCPMSCE
Device application sub billing
[Us] rated supply voltage 90...277 V AC 50/60 Hz +/- 1 %
Energy management sub billing and cost allocation
Range PowerLogic
Product name PowerLogic BCPMSC
Market segment healthcare cost management: cost allocation: panelboard, data center cost management: cost allocation: panelboard, healthcare cost management: billing: panelboard, data center cost management: billing: panelboard
Product or component type multi-circuit energy meter
Power monitoring basic instrumentation
Type of measurement active energy, power factor, active power, frequency, current, voltage
Variant advanced + ethernet
Range of product PowerLogic
Power quality analysis voltage sag and swell detection
Network frequency 60 Hz, 50 Hz
Complementary
Analogue input type current 1 V, current 0.333 V42 x
Update time 1.8 s
Measurement accuracy voltage 1 % 90…277 V, mains current 3 % 2…100 %, mains current 3 % 1…100 %, branch current 1 % 2…100 A, branch current 2 % 0.25…2 A
Provided equipment 0 x current transformer, 2 x adapter board
Number of inputs 0
Communication of data over voltage alarm, low current alarm, high current alarm, high-high current alarm, low-low current alarm, under voltage alarm
Communication port protocol SNMP v2, Modbus TCP, BACnet MS/TP, BACnet IP, Modbus RTU
Number of outputs 0
Sampling rate 256 samples/cycle
Measurement voltage 150-480 V phase to phase, 90-277 V phase to neutral
Communication port support ETHERNET, RS485
Environment
Operating altitude 3000 m
Width 288 mm
Relative humidity 95-95 %
Ambient air temperature for storage -40-70 °C
Mounting mode clip-on
Net weight 1.5 kg
Product certifications UL 508
Mounting support board
Standards ANSI C12.1, EN 61010, IEC 61010-1
Ambient air temperature for operation 0-60 °C
Height 146 mm
Packing Units
Unit Type of Package 1 1
Number of Units in Package 1 1
Package 1 Height 14.287 cm
Package 1 Width 15.24 cm
Package 1 Length 19.05 cm
Package 1 Weight 4.536 kg