Issue: What is the function of the Output Contactor Command feature of the Altivar 61/71 series drives and how is it configured? Product Line: Altivar 61 and Altivar 71 series drives. Environment: All models, All serial numbers. Cause: Clarification of this function is needed. Resolution: The Output Contactor Command function of the ATV61 / ATV71 series drives is designed to manage an isolation contactor that is placed between the output of the drive and the motor. This is an optional contactor,...
Read more
Yes, by using the 755RB optional relay base. The relay base can be connected to an auxiliary input type device such as a C-Bus bus coupler so that when the relay in the smoke alarm base operates, it triggers the system according to its programming. The system may then be programmed to send push notifications to a smart device or to trigger an event like enabling exit lighting, or triggering an “all lights on” function. The remote test/hush input on the 755RB can be connected to a relay on a ho...
Read more
Rated at 10A thermal.
Read more
Single pole, 1 N/O & 1 N/C, Nickel/Silver auxilary contact
Read more
GV2ME, GV2P, GV2L, GV2LE, GV3P and GV3L circuit-breakers can be fitted with the following optional fault indicating contact blocks: GVAD0110 GVAD0101 GVAD1010 GVAD1001 These blocks comprise of fault signalling contacts and instantaneous auxiliary contacts GVAD0110 A N/O instantaneous auxiliary contact (terminals 53-54), closed when the device is energized and open when the device is de-energized A N/C fault signalling contact (terminals 95-96), closed if there is no fault...
Read more